LED Lighting
  • Morimoto XB LED Headlight Bulb 2
    Morimoto XB LED Headlight Bulb 2

    MORIMOTO XB LED HEADLIGHT BULBS

    DESCRIPTION

    On the success of other automotive lighting products from Morimoto we’re proud to finally introduce the XB LED Headlight bulbs.More

    Expanding: Unlike anything else and especially the generic LED-based replacements you can buy for a dime a dozen, these are easily the best LED-based headlight bulbs to hit the market yet.

    Instantly: Beautiful white light. A great choice for Daytime Running Lights, fog lights, or high beams. A few minutes to lock the bulbs in, and the wiring is completely plug-n-play. No ballasts to mount, no relay harness to run. the XB LED’s are a suitable alternative for illuminating auxiliary light sources. (note, for vehicles with pulsed DRL systems, we do recommend a relay harness & capacitor link to smooth input power)

    Focused:With two monster sized CREE 30W chips, the XB LED bulbs are capable of producing up to 3000 Lumens. By mounting the chips in an opposed fashion on a purposely thin (yet rigid) thermal stem, the focus attempts to mimic that of a Halogen or HID bulb – which means the distribution of light will be as good as it gets [for an LED-based system, that is]

    Cool:Heat management is crucial for reliability when it comes to LEDs. Here, a copper heat-pipe extracts as much heat as possible from the area surrounding the LED chips and transfers it to the stacked aluminum radiator at the back of the bulb. No need for a cheap ball-bearing computer fan like other designs.

    Fitment:The XB bulbs feature a waterproof, external LED Driver with weather-resistant inputs and outputs. This allows for easier serviceability, and a much smaller bulb base – allowing the bulbs to fit inside most automotive headlights without any interference with the housing caps, etc.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $160.00
  • Morimoto XB LED T10 Bulbs 6
    Morimoto XB LED T10 Bulbs 6

    T10/194 MORIMOTO XB LED BULBS

    DESCRIPTION

    XB LED. Forget about filaments! Let there be light! Lots of light…All new from Morimoto.More

    Modern Touch:The XB LED bulbs produce plenty of pure white light to improve illumination while adding a modern touch to your vehicle’s lighting. They illuminate perfectly evenly, not spotty like the surface mounted chips found on other bulbs. Just don’t stare if you care to see anything after that!

    Construction: The bulb is constructed with a white fiberglass PCB sandwiched between two very unique white-faced COB LED panels. The positive/ground contacts are perforated and dipped in gold copper to improve contact across both sides of the base.

    Everywhere: From interior lighting to city and marker lights, the T10/194 fitment is easily one of the most common sizes used in the automotive industry. Chances are, there’s a place for these bulbs on your car!

    Can-bus: The XB LED bulbs are can-bus friendly and should not hyper flash or cause any “lamp out” errors in MOST applications. If however your vehicle requires more resistance, we recommend using the Morimoto HD Load Resistors

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $30.00
  • XSBHalos
    XSBHalos

    MORIMOTO XSB LED HALOS

    DESCRIPTION

    The meaning of what an “angel eye” is, the 2.0 version of the Morimoto XSB LEDs are the culmination of every practical lesson learned since LED halos hit the market.More

    Redefining: Usability. Reliability. Intensity. Uniformity. Simplicity. Flexible functionality. Last but not least; affordability. Nothing has been sacrificed. 

    Usability: There are three micro-mounts integrated into their backing, making the XSB’s the easiest and cleanest rings on the market to install. Now you can forget about failing glue or wires wrapped around the face of your halos forever. Don’t be “that guy” with dripping glue or picture hanging wire visible inside your headlights.

    Reliability: The innovative Hybrid-LED technology delivers a virtually infinite lifespan of 50,000 hours. That’s almost six straight years! Because they’re based on much more stable and mature SMD-LEDs; they are considerably more reliable between hot/cold cycles compared to “new” COB based halos. This video explains the XSB LED technology a bit more in detail.

    Intensity and Uniformity: A special blend of silicone and phosphor covers the face of each ring. This proprietary coating is responsible for the neutral “white when off” look of the XSB’s and their amazing, uniform intensity – which is unlike anything else on the market.

    Simplicity: Wiring is easy with a variant of the X Change Module integrated into the updated 2nd Gen LED drivers that powers each ring. The white wire receives a constant 12V+. The black wire is grounded, and the yellow wire is tapped into the turn signal circuit.

    Flexibility: Though they come out of the box ready to run as a switchback system, the XSB halos can easily also be wired for use as a white-only or amber only halo!

    Size Matters: Doing a projector retrofit and not sure which size XSB halo you’ll need for your shrouds? Check out our Sizing Guide.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    From: $105.00
  • XSB Demon Eye
    XSB Demon Eye

    MORIMOTO XSB LED DEMON EYES

    DESCRIPTION

    The XSB Switchback setup is the more mature older brother to the extremely popular XC RGB setup from Morimoto.More

    Mean Looking: Designed with a universal mount that will fit a wide range of aftermarket and OEM projectors with ease; the XSB Demon Eyes will add a perfect white and amber glow just behind the projector lens. In combination with our custom lens etching service, you can create one mean looking set of headlights!

    Reliability: The innovative Hybrid-LED technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs; they are considerably more reliable between hot/cold cycles This video explains the XSB LED technology a bit more in detail.

    Simplicity: Wiring is easy with a variant of the X Change Module integrated into the LED driver that powers each ring. The white wire receives a constant 12V+. The black wire is grounded, and the yellow wire is tapped into the turn signal circuit.

    NOTE: Demon Eye brackets are not compatible with Morimoto RetroQuik projector brackets.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    From: $70.00
  • Morimoto X.DRL-5 LED 1
    Morimoto X.DRL-5 LED 1

    MORIMOTO X.DRL 5

    DESCRIPTION

    So bright they'll put most headlights to shame! The Morimoto X.DRL Five uses five strong 5W flat-face LED to produce an amazingly clear, white light.More

    Trendy: After the Audi LED DRL craze hit the automotive aftermarket, plenty of low quality DRL products came about. None of them can match the looks and quality of Morimoto's X.DRL system. With Five 5000K LED's lined up in a row and projected through 15mm aspheric projector lenses, these are as “OEM” looking as it gets.

    Heavy Duty: Their CNC Machined, 6061 Aluminum body has been powder coated black for a stealth, OEM look once mounted.

    Bomb Proof: The internal LED circuitry is completely protected against the elements with a hard acrylic potting compound. Damage from moisture, dust, or dirt is no threat.

    Easy Setup: With a simple power and ground for each terminated with a standard 9006 male plug, wiring the X.DRL will be easy. You can trigger them with your parking lights, low beams, or any other 12V source that comes on along with the vehicles ignition for a true DRL style circuit.

    Adjustable: The entire setup is mounted to an integrated swivel-mount bracket for easy installation and the ability to adjust the forward-facing angle of the LED's.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    From: $95.00
  • Morimoto XB LED Type S Fog Lights 1
    Morimoto XB LED Type S Fog Lights 1

    MORIMOTO XB LED FOGS (TYPE S)

    DESCRIPTION

    Dare to compare! The XB LED Fog Lights look great. Perform great. are well-built. Have a virtually infinite life span. An unbeatable warranty. More

    Designed: To fit many modern applications from Subaru, Honda, Acura, Ford, and Nissan; these complete housings will mount behind the bumper with all of the stock mounting points. Their aim can also be adjusted just like stock with the integrated assembly that’s cast into their shell. Check the compatibility section below for a list of known applications.

    Powered: by three Philips Luxeon-T 5000K LED’s that produce around 1200 raw lumens per side. The projector based optics inside concentrate a total of 2400 lumens of pure white light into a beam that’s super wide and perfectly distributed for use as a fog light. They are SAE, DOT, and ECE approved.

    Well-Built: Their durable polycarbonate lens should resist the test of time, keeping the housings looking new. The powder-coated cast aluminum housing is light-weight and much stronger than comparable plastic alternatives. Doubling as the heat-sink for the LED’s, the housings completely protect the internals from moisture and road debris.

    Plug n Play: Wiring is easy too! The XB LED Fogs are designed to work without any special wiring. They will plug into the factory power outlets for the stock fog lights and each fog light includes all necessary connectors, rubber seals, and pigtails for a plug n play install.

    Word on the Street: Don’t just take our word for it, check out these customer reviews/installs: Honda Fit, Ford Focus, Subaru Legacy

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    From: $250.00
  • Morimoto XB LED Type T Fog Lights 1
    Morimoto XB LED Type T Fog Lights 1

    MORIMOTO XB LED FOGS (TYPE T)

    DESCRIPTION

    Dare to compare! The XB LED Fog Lights look great. Perform great. are well-built. Have a virtually infinite life span. An unbeatable warranty. More

    Designed: To fit many modern applications from Toyota and Lexus; these complete housings will mount behind the bumper with all of the stock mounting points. Their aim can also be adjusted just like stock with the integrated assembly that’s cast into their shell. Check the compatibility section below for a list of known applications.

    Powered: by three Philips Luxeon-T 5000K LED’s that produce around 1200 raw lumens per side. The projector based optics inside concentrate a total of 2400 lumens of pure white light into a beam that’s super wide and perfectly distributed for use as a fog light. They are SAE, DOT, and ECE approved.

    Well-Built: Their durable polycarbonate lens should resist the test of time, keeping the housings looking new. The powder-coated cast aluminum housing is light-weight and much stronger than comparable plastic alternatives. Doubling as the heat-sink for the LED’s, the housings completely protect the internals from moisture and road debris.

    Plug n Play: Wiring is easy too! The XB LED Fogs are designed to work without any special wiring. They will plug into the factory power outlets for the stock fog lights and each fog light includes all necessary connectors, rubber seals, and pigtails for a plug n play install.

    Word on the Street: Don’t just take our word for it, check out these customer reviews/installs: 7th-Gen Toyota Camry, 2012+ Toyota Tacoma

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    From: $250.00