• Morimoto XB35 AMP Ballast 1
    Morimoto XB35 AMP Ballast 1

    AMP: MORIMOTO XB35

    DESCRIPTION

    With distribution exceeding 150,000 units over the last four years; more enthusiasts chose Morimoto over any other aftermarket ballast. The brand new XB35 ballasts excel in every way.More

    Inspired: Packaged into a more retrofit-friendly design, The new XB’s feature countless elements derived from the most popular OEM benchmarks. As good as they are; even arrogant retrofitters may start second-guessing those bulky, power hungry, exposed-to-the-elements, OE ballasts.

    Protected: Their die-cast aluminum shell houses a 100% potted circuit board; eliminating any chance of moisture damage. The AMP SuperSeal three-pin connector from TE Connectivity between the igniter and the ballast ensures the safety of this crucial output.

    Compact: Slim 17mm body will mount almost anywhere with their extremely functional and attractive eight-position mounting brackets.

    Versatile: If you’re like many of us retrofitters: the setup is always changing and now your ballasts can keep up! Since the igniter cord can be unplugged from the ballast, you can easily change from AMP to D2S or vice-versa (without the use of unreliable adapters, that is). Likewise, if an igniter does happen to go bad, it can easily be replaced.

    Fast, Friendly and Efficient: Power hungry ballasts never work well with tricky CanBus systems, but the new XB35 ballast consume < 5A on ignition without compromising their reasonably quick warm up speed. That’s much less than Denso, Mitsubishi, FastBright, and the old Morimoto too, which makes their ability to reach full intensity a more efficient process.

    Modern Like all modern OEM D1 and D2 ballasts: the XB has relocated igniters far closer to the HID bulb. The lack of high voltage transmitted through wiring drastically reduces EMI/RFI (radio interference). Total system reliability is also improved by shielding the main circuit board from the static produced by these high voltage bursts on start up.

    Reliable and Smart: The XB35 ballasts are designed to last for 2500 hours and there’s not much that will stand in their way. The Matured DSP 2.0 software recognizes outside system faults such as a loose high voltage connection, and after one misfire will cut power rather than potentially self-destruct.

    Functional Works of Art: Designed by Artur Saakyan in California, the Morimoto XB35 Ballasts feature gloss piano black paint. Laser etched graphics. Stainless Steel hardware. Color coordinated mounting bracket and TechFlex braided insulation.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $185.00
  • Morimoto XB55 AMP Ballast - 1
    Morimoto XB55 AMP Ballast - 1

    AMP: MORIMOTO XB55

    DESCRIPTION

    With distribution exceeding 150,000 units over the last four years; more enthusiasts chose Morimoto over any other aftermarket ballast. The brand new XB55 ballasts excel in every way.More

    Inspired: Packaged into a more retrofit-friendly design, The new XB's feature countless elements derived from the most popular OEM benchmarks. As good as they are; even arrogant retrofitters may start second-guessing those bulky, power hungry, exposed-to-the-elements, OE ballasts.

    Protected: Their die-cast aluminum shell houses a 100% potted circuit board; eliminating any chance of moisture damage. The AMP SuperSeal three-pin connector from TE Connectivity between the igniter and the ballast ensures the safety of this crucial output.

    Compact: Slim 17mm body will mount almost anywhere with their extremely functional and attractive eight-position mounting brackets.

    Versatile: If you're like many of us retrofitters: the setup is always changing and now your ballasts can keep up! Since the igniter cord can be unplugged from the ballast, you can easily change from AMP to D2S or vice-versa (without the use of unreliable adapters, that is). Likewise, if an igniter does happen to go bad, it can easily be replaced.

    Fast, Friendly and Efficient: Power hungry ballasts never work well with tricky CanBus systems, but the new XB35 ballast consume < 5A on ignition without compromising their reasonably quick warm up speed. That's much less than Denso, Mitsubishi, FastBright, and the old Morimoto too, which makes their ability to reach full intensity a more efficient process.

    Modern Like all modern OEM D1 and D2 ballasts: the XB has relocated igniters far closer to the HID bulb. The lack of high voltage transmitted through wiring drastically reduces EMI/RFI (radio interference). Total system reliability is also improved by shielding the main circuit board from the static produced by these high voltage bursts on start up.

    Reliable and Smart: The XB55 ballasts are designed to last for 2500 hours and there's not much that will stand in their way. The Matured DSP 2.0 software recognizes outside system faults such as a loose high voltage connection, and after one misfire will cut power rather than potentially self-destruct.

    Functional Works of Art: Designed by Artur Saakyan in California, the Morimoto XB55 Ballasts feature gloss piano black paint. Laser etched graphics. Stainless Steel hardware. Color coordinated mounting bracket and TechFlex braided insulation.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $185.00
  • Morimoto XB35 D2S Ballast - 1
    Morimoto XB35 D2S Ballast - 1

    D2S: MORIMOTO XB35

    DESCRIPTION

    With distribution exceeding 150,000 units over the last four years; more enthusiasts chose Morimoto over any other aftermarket ballast. The brand new XB35 ballasts excel in every way.More

    Inspired: Packaged into a more retrofit-friendly design, The new XB's feature countless elements derived from the most popular OEM benchmarks. As good as they are; even arrogant retrofitters may start second-guessing those bulky, power hungry, exposed-to-the-elements, OE ballasts.

    Protected: Their die-cast aluminum shell houses a 100% potted circuit board; eliminating any chance of moisture damage. The AMP SuperSeal three-pin connector from TE Connectivity between the igniter and the ballast ensures the safety of this crucial output.

    Compact: Slim 17mm body will mount almost anywhere with their extremely functional and attractive eight-position mounting brackets.

    Versatile: If you're like many of us retrofitters: the setup is always changing and now your ballasts can keep up! Since the igniter cord can be unplugged from the ballast, you can easily change from AMP to D2S or vice-versa (without the use of unreliable adapters, that is). Likewise, if an igniter does happen to go bad, it can easily be replaced.

    Fast, Friendly and Efficient: Power hungry ballasts never work well with tricky CanBus systems, but the new XB35 ballast consume < 5A on ignition without compromising their reasonably quick warm up speed. That's much less than Denso, Mitsubishi, FastBright, and the old Morimoto too, which makes their ability to reach full intensity a more efficient process.

    Modern Like all modern OEM D1 and D2 ballasts: the XB has relocated igniters far closer to the HID bulb. The lack of high voltage transmitted through wiring drastically reduces EMI/RFI (radio interference). Total system reliability is also improved by shielding the main circuit board from the static produced by these high voltage bursts on start up.

    Reliable and Smart: The XB35 ballasts are designed to last for 2500 hours and there's not much that will stand in their way. The Matured DSP 2.0 software recognizes outside system faults such as a loose high voltage connection, and after one misfire will cut power rather than potentially self-destruct.

    Functional Works of Art: Designed by Artur Saakyan in California, the Morimoto XB35 Ballasts feature gloss piano black paint. Laser etched graphics. Stainless Steel hardware. Color coordinated mounting bracket and TechFlex braided insulation.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $185.00
  • Morimoto XB55 D2S Ballast - 1
    Morimoto XB55 D2S Ballast - 1

    D2S: MORIMOTO XB55

    DESCRIPTION

    With distribution exceeding 150,000 units over the last four years; more enthusiasts chose Morimoto over any other aftermarket ballast. The brand new XB55 ballasts excel in every way.More

    Inspired: Packaged into a more retrofit-friendly design, The new XB's feature countless elements derived from the most popular OEM benchmarks. As good as they are; even arrogant retrofitters may start second-guessing those bulky, power hungry, exposed-to-the-elements, OE ballasts.

    Protected: Their die-cast aluminum shell houses a 100% potted circuit board; eliminating any chance of moisture damage. The AMP SuperSeal three-pin connector from TE Connectivity between the igniter and the ballast ensures the safety of this crucial output.

    Compact: Slim 17mm body will mount almost anywhere with their extremely functional and attractive eight-position mounting brackets.

    Versatile: If you're like many of us retrofitters: the setup is always changing and now your ballasts can keep up! Since the igniter cord can be unplugged from the ballast, you can easily change from AMP to D2S or vice-versa (without the use of unreliable adapters, that is). Likewise, if an igniter does happen to go bad, it can easily be replaced.

    Fast, Friendly and Efficient: Power hungry ballasts never work well with tricky CanBus systems, but the new XB55 ballast consume < 5A on ignition without compromising their reasonably quick warm up speed. That's much less than Denso, Mitsubishi, FastBright, and the old Morimoto too, which makes their ability to reach full intensity a more efficient process.

    Modern Like all modern OEM D1 and D2 ballasts: the XB has relocated igniters far closer to the HID bulb. The lack of high voltage transmitted through wiring drastically reduces EMI/RFI (radio interference). Total system reliability is also improved by shielding the main circuit board from the static produced by these high voltage bursts on start up.

    Reliable and Smart: The XB55 ballasts are designed to last for 2500 hours and there's not much that will stand in their way. The Matured DSP 2.0 software recognizes outside system faults such as a loose high voltage connection, and after one misfire will cut power rather than potentially self-destruct.

    Functional Works of Art: Designed by Artur Saakyan in California, the Morimoto XB55 Ballasts feature gloss piano black paint. Laser etched graphics. Stainless Steel hardware. Color coordinated mounting bracket and TechFlex braided insulation.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $185.00
  • D2S Denso Slim Ballasts 1
    D2S Denso Slim Ballasts 1

    D2S: DENSO SLIM

    DESCRIPTION

    The Denso slim ballasts have been around for years as original-equipment for Toyota / Lexus Vehicles, as the saying goes “if it ain’t broke, don’t fix it” as there’s no room for improvement.More

    OEM Kinda Guy: Great choice for those “OEM or nothin!” kind of guys who need a set of ballasts to power their new D2S-based projector retrofit. The Denso’s are found under the hood of many modern Toyota, Lexus, Mazda, and Porsche vehicles as part of the original-equipment HID system – if these big names trust them, so should you.

    But Wait: With all this good, what about the bad? Well, OEM ballasts are designed to be mounted completely or partially inside of a headlight housing, so their shell is not naturally water-proof, and if they get wet, their warranty will be void. You can protect your investment with our optional OEM Ballast Potting Service, which makes their electronics impenetrable to moisture damage.

    Good Deal: These like-new ballasts are cleaned, tested and re-certified in house to ensure perfection functionality. We offer them for $250/pair including the custom outputs, compare to dealer list at around $500 each!

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $350.00
  • D2S Matsushita Gen V Ballasts 3
    D2S Matsushita Gen V Ballasts 3

    D2S: MATSUSHITA GEN V

    DESCRIPTION

    An updated version of the extremely popular Matsushita Gen 4, the 5th Generation has the newest Igniter and a smaller footprint than most OEM ballasts on the market.More

    In Comparison: To the OEM Denso ballasts offered at Vikom, the Matsushita has a smaller footprint and a considerably longer output cord made possible by relocating the igniters to the D2S head. It’s a toss up!

    Popular: They’re perfect for use in a HID headlight retrofit or replacing an old worn-out unit in your stock xenon headlights. The Matsushita’s are found under the hood of many modern Nissan, Infiniti, and Subaru vehicles as part of the original-equipment HID system – and if these big brands can trust them; so can you.

    But Wait: With all this good, what about the bad? Well, OEM ballasts are designed to be mounted completely or partially inside of a headlight housing, so their shell is not naturally water-proof, and if they get wet, their warranty will be void. You can protect your investment with our optional OEM Ballast Potting Service, which makes their electronics impenetrable to moisture damage.

    Beware: The Matsushita ballasts are best used with OEM Quality bulbs from Philips, Osram, or the Vikom VX35. Often times cheap D2S bulbs will not work reliably with these ballasts, and it’s the bulb’s fault.

    A Steal: We’re proud to offer such an awesome OEM ballast at only $240/pair. Compared to their dealership price of around $450 each, our price is a steal!

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $340.00
  • xmorimoto_d2s_xb_hid_headlight_bulbs_1_5-jpg-pagespeed-ic-uhldmdcxoj
    xmorimoto_d2s_xb_hid_headlight_bulbs_1_5-jpg-pagespeed-ic-uhldmdcxoj

    MORIMOTO: D2S XB HID

    DESCRIPTION

    Absolute the best performing D series in affordable budget! The Morimoto D2S XB HID bulbs are compatible with 35W and 55W and will produce more lumens, last longer, project farther, and look better doing it.More

    Art of HIDs: An absolutely art work of its own design and engineering. Created by Korean engineer team to redefine a high standard of the aftermarket HID bulbs.

    Brightest ever: The heart of the XB D2S adopts from the perfectly aligned 100% Philips Quartz glass that a capsule from APL-USA. Using high quality xenon gas from German-supplier Messer; Austria plansee tungsten metal electrode, the bulbs produce nearly the same luminosity (intensity) as the amazing Osram CBI bulbs at 5500K.

    Long Lifespan: The Austrian-sourced Plansee electrodes pure pills with xenon ensure brighter light output and longer lifespan. Completely UV radiation filtered Philips Quartz tube, reduce damage to headlamp reflectors to well maintained its normal lifespan. 

    Precise Alignment: When it comes to HID bulbs, the capsule alignment is even more important than anything else. The glass capsule of the VX35 is surrounded by a OEM-type metal frame. The result having this structure equalize distribution of light, while improving accuracy of the focus point. 

    Value: It’s notorious that when comes to aftermarket HID, “you pay for what you get”. Price even higher than some Ebay HID sets, but in comparison to something like the Osram CBI or Philips XV D2S bulbs, the bang for the buck here is absolutely unbeatable.

    Compatibility: The VX35 bulbs are a perfect match for any OEM replacement headlamps or projector retrofits that use D2S bulbs. They are fully compatible with all ballasts from Morimoto, Denso, Hella, Bosch, Koito and even the most picky Nissan/Infiniti ballasts from Matsushita/Panasonic!

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $90.00
  • D2S Osram Xenarc 66240 4
    D2S Osram Xenarc 66240 4

    D2S: OSRAM XENARC 66240

    DESCRIPTION

    Osram 66240 4200K D2S; an updated replacement for the 66040, the 66240 is original equipment on many modern Japanese and German cars today.More

    Though it’s Osram’s “base model” we find that hard to consider. Osram 66240’s have all the same specs as the 85122+ as far as Kelvin, rated lifetime, and also has the same style metal base to ensure a precise, uniform, and clean beam pattern.

    These are what the amazing 66240 CBI and SVS bulbs are based off of, have nearly the same specifications and cost nearly 50% of their price. Compare to dealership list price @ around $150/bulb.

    Vikom is proud to offer high quality Original-Equipment Osram bulbs. It is estimated that 80% of these bulbs sold through outlets such as eBay or Amazon are fakes.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $150.00
  • d2s_osram_66240_hbi_6000k_hid_headlight_bulbs_1_2
    d2s_osram_66240_hbi_6000k_hid_headlight_bulbs_1_2

    D2S: OSRAM XENARC 66240 CBH

    DESCRIPTION

    The King: Wait what? Yeah, we thought Osram's CBI was the best…until they released the CBH in Q2 2016. It is the currently the brightest 6000K D2S bulb on the market, period.More

    Amazing: What makes them so amazing? Osram's Cool Blue Intense (CBI) bulbs broke all the rules when they produced more lumens than a comparable 4300K bulb while offering a whiter 5500K light output. But now…they've done it again with the Cool Blue Hyper. Even more light output compared to the Cool Blue Intense, but in a 6000K version. Mind blown!

    Bottom Line: Most people who prefer OEM bulbs these days prefer Osram. Most people who prefer Osram prefer the CBI. Most people preferred the CBI because it was the brightest…so we have a feeling these will pick up in popularity pretty quick!

    In Testing: Powered from the same Matsushita ballast and projected through a new Morimoto 4TL-R Bi-xenon projector, the CBH trumped all. We'll let the numbers do the talking. Philips 85122 WX: 223 Lux. Osram D2S CBI: 316 Lux. Osram D2S CBH: 332 Lux!

    Genuine: Vikom is proud to offer these bulbs in their original retail packaging from Osram. We pride ourselves on being one of the last few distributors shipping genuine Philips & Osram lamps in Australia. It is estimated that 80% of these bulbs sold through outlets such as eBay or Amazon are fakes.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $280.00
  • D2S Osram 66240 CBI HID Bulbs 3
    D2S Osram 66240 CBI HID Bulbs 3

    D2S: OSRAM XENARC 66240 CBI

    DESCRIPTION

    The Best: Easily the best D2S bulbs to ever hit the market, we are honored to offer the ultimate Osram CBI Bulbs. Indeed they are the “Rolls Royce” of D2S Lamps.More

    Amazing: What makes them so amazing? Osram’s Cool Blue Intense bulbs offer more lumens than the once industry-standard Philips 85122+ 4300K bulb, but with a higher Kelvin rating of 5500K. Whereas most bulbs lose lumens when their Kelvin rises, the CBI’s still manage to give users the benefit of brighter light combined with whiter light – the best of both worlds indeed!

    Backed: Bottom line? Everybody who uses them agrees they’re among the best D2S bulbs ever made. We’ve never heard a customer complain that their Osram’s weren’t worth the money

    Genuine: Vikom is proud to offer these bulbs in their original retail packaging from Osram. We pride ourselves on being one of the last few distributors shipping genuine Philips & Osram lamps in Australia. It is estimated that 80% of these bulbs sold through outlets such as eBay or Amazon are fakes.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    $250.00
  • d2s_osram_xenarc_66240nxb_nightbreaker_hid_xenon_headlight_bulbs_4
    d2s_osram_xenarc_66240nxb_nightbreaker_hid_xenon_headlight_bulbs_4

    D2S: OSRAM XENARC 66240 NIGHTBREAKER

    DESCRIPTION

    The Best: Over 5 years ago, Philips released the 85122+, and as great of a bulb as it is – it's old news now that Osram's latest 4200K competitor, the 66240 Nightbreaker.More

    Brightest: What makes them so amazing? Osram touts their Nightbreaker D2S bulbs as having “up to 70% more light” output compared to traditional OEM D2S bulbs. How this is possible we have no clue, but what we can tell you is that they're bright, really, really bright. A technical marvel indeed!

    Genuine: Vikom is proud to offer these bulbs in their original retail packaging from Osram. We pride ourselves on being one of the last few distributors shipping genuine Philips & Osram lamps in Australia. It is estimated that 80% of these bulbs sold through outlets such as eBay or Amazon are fakes.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    $250.00
  • D4S Osram CBI HID Bulbs 1
    D4S Osram CBI HID Bulbs 1

    D4S: OSRAM XENARC 66440 CBI

    DESCRIPTION

    An instant success story, the Osram Cool Blue Intense “CBI” series of HID Lamps has easily out-performed the competitors in all aspects. They are now available in a Mercury-free version for vehicles with D4S Headlamps!More

    What makes them so amazing? Osram’s Cool Blue Intense bulbs offer more lumens than the once industry-standard Philips 4300K bulb, but with a higher Kelvin rating of 5000K. Whereas most bulbs lose lumens when their Kelvin rises, the CBI’s still manage to give users the benefit of brighter light combined with whiter light – the best of both worlds indeed!

    Bottom line? Everybody who uses them agrees they’re among the best D4S bulbs ever made. We’ve never heard a customer complain that their Osram’s weren’t worth the money, and most of the guys here at TRS use them in our own vehicles.

    Bottom line? Everybody who uses them agrees they’re among the best D2S bulbs ever made. We’ve never heard a customer complain that their Osram’s weren’t worth the money. There are more reviews here on HIDplanet!

    Vikom is proud to offer these bulbs in their original retail packaging from Osram. We pride ourselves on being one of the last few distributors shipping genuine Philips & Osram lamps in the US. It is estimated that 80% of these bulbs sold through outlets such as eBay or Amazon are fakes.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $250.00
  • VX35_D2R_1
    VX35_D2R_1

    D2R: VIKOM VX35 HID

    DESCRIPTION

    Absolute the best performing D series in affordable budget! The Vikom VX35 D2R HID bulbs are compatible with 35W and 55W and will produce more lumens, last longer, project farther, and look better doing it.More

    Art of HIDs: An absolutely art work of its own design and engineering. Created by Korean engineer team to redefine a high standard of the aftermarket HID bulbs.

    Brightest ever: The heart of the VX35 D2R adopts from the perfectly aligned 100% Philips Quartz glass that a capsule from APL-USA. Using high quality xenon gas from German-supplier Messer; Austria plansee tungsten metal electrode, the bulbs produce nearly the same luminosity (intensity) as the amazing Osram CBI bulbs at 5500K.

    Long Lifespan: The Austrian-sourced Plansee electrodes pure pills with xenon ensure brighter light output and longer lifespan. Completely UV radiation filtered Philips Quartz tube, reduce damage to headlamp reflectors to well maintained its normal lifespan. 

    Precise Alignment: When it comes to HID bulbs, the capsule alignment is even more important than anything else. The glass capsule of the VX35 is surrounded by a OEM-type metal frame. The result having this structure equalize distribution of light, while improving accuracy of the focus point. 

    Value: It’s notorious that when comes to aftermarket HID, “you pay for what you get”. Price even higher than some Ebay HID sets, but in comparison to something like the Osram CBI or Philips XV D2S bulbs, the bang for the buck here is absolutely unbeatable.

    Compatibility: The VX35 bulbs are a perfect match for any OEM replacement headlamps or projector retrofits that use D2R bulbs. They are fully compatible with all ballasts from Morimoto, Denso, Hella, Bosch, Koito and even the most picky Nissan/Infiniti ballasts from Matsushita/Panasonic!

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $50.00
  • morimoto_d1s_xb_hid_bulbs_2_1
    morimoto_d1s_xb_hid_bulbs_2_1

    D1S: Morimoto XB HID

    DESCRIPTION

    Absolute the best performing D series in affordable budget! The Morimoto D1S XB HID bulbs are compatible with 35W and 55W and will produce more lumens, last longer, project farther, and look better doing it.More

    Art of HIDs: An absolutely art work of its own design and engineering. Created by Korean engineer team to redefine a high standard of the aftermarket HID bulbs.

    Brightest ever: The heart of the XB D1S adopts from the perfectly aligned 100% Philips Quartz glass that a capsule from APL-USA. Using high quality xenon gas from German-supplier Messer; Austria plansee tungsten metal electrode, the bulbs produce nearly the same luminosity (intensity) as the amazing Osram CBI bulbs at 5500K.

    Long Lifespan: The Austrian-sourced Plansee electrodes pure pills with xenon ensure brighter light output and longer lifespan. Completely UV radiation filtered Philips Quartz tube, reduce damage to headlamp reflectors to well maintained its normal lifespan. 

    Precise Alignment: When it comes to HID bulbs, the capsule alignment is even more important than anything else. The glass capsule of the XB35 is surrounded by a OEM-type metal frame. The result having this structure equalize distribution of light, while improving accuracy of the focus point. 

    Value: It’s notorious that when comes to aftermarket HID, “you pay for what you get”. Price even higher than some Ebay HID sets, but in comparison to something like the Osram CBI or Philips XV D1S bulbs, the bang for the buck here is absolutely unbeatable.

    Compatibility: The XB bulbs are a perfect match for any OEM replacement headlamps or projector retrofits that use D1S bulbs. They are fully compatible with all ballasts from Morimoto, Denso, Hella, Bosch, Koito and even the most picky Nissan/Infiniti ballasts from Matsushita/Panasonic!

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $110.00
  • osram_d1s_nightbreaker_oem_hid_bulbs_4
    osram_d1s_nightbreaker_oem_hid_bulbs_4

    D1S: Osram Xenarc 66144 Nightbreaker

    DESCRIPTION

    The Best: The warmer brother to the popular 66144 CBI that currently dominates the market, the Nightbreaker has even better coverage than previously available!More

    Brightest: What makes them so amazing? Osram touts their Nightbreaker D1S bulbs as having “up to 70% more light” output compared to traditional OEM D1S bulbs. How this is possible we have no clue, but what we can tell you is that they’re bright, really, really bright. A technical marvel indeed!

    Genuine: Vikom is proud to offer these bulbs in their original retail packaging from Osram. We pride ourselves on being one of the last few distributors shipping genuine Philips & Osram lamps in Australia. It is estimated that 80% of these bulbs sold through outlets such as eBay or Amazon are fakes.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    $250.00
  • xosram_66144_d1s_cbi_hid_headlight_bulbs_8_2-jpg-pagespeed-ic-akb1scnpe
    xosram_66144_d1s_cbi_hid_headlight_bulbs_8_2-jpg-pagespeed-ic-akb1scnpe

    D1S: Osram Xenarc 66144 CBI

    DESCRIPTION

    The Best: Easily the best D1S bulbs to ever hit the market, we are honored to offer the ultimate Osram CBI Bulbs. Indeed they are the “Rolls Royce” of D1S Lamps.More

    Amazing: What makes them so amazing? Osram’s Cool Blue Intense bulbs offer more lumens than the once industry-standard Philips 85122+ 4300K bulb, but with a higher Kelvin rating of 5500K. Whereas most bulbs lose lumens when their Kelvin rises, the CBI’s still manage to give users the benefit of brighter light combined with whiter light – the best of both worlds indeed!

    Backed: Bottom line? Everybody who uses them agrees they’re among the best D1S bulbs ever made. We’ve never heard a customer complain that their Osram’s weren’t worth the money

    Genuine: Vikom is proud to offer these bulbs in their original retail packaging from Osram. We pride ourselves on being one of the last few distributors shipping genuine Philips & Osram lamps in Australia. It is estimated that 80% of these bulbs sold through outlets such as eBay or Amazon are fakes.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    $250.00
  • VX35_D4S_2
    VX35_D4S_2

    D4S: VIKOM VX35 HID

    DESCRIPTION

    Absolute the best performing D series in affordable budget!! The Vikom XB35 D4S bulbs are a perfect upgrade or replacement for many Toyota / Lexus models using mercury-free D4S HID headlamps.More

    Art of HIDs: An absolutely art work of its own design and engineering. Created by Korean engineer team to redefine a high standard of the aftermarket HID bulbs.

    Brightest ever: The heart of the VX35 D2S adopts from the perfectly aligned 100% Philips Quartz glass that a capsule from APL-USA. Using high quality xenon gas from German-supplier Messer; Austria plansee tungsten metal electrode, the bulbs produce nearly the same luminosity (intensity) as the amazing Osram CBI bulbs at 5500K.

    Long Lifespan: The Austrian-sourced Plansee electrodes pure pills with xenon ensure brighter light output and longer lifespan. Completely UV radiation filtered Philips Quartz tube, reduce damage to headlamp reflectors to well maintained its normal lifespan. 

    Precise Alignment: When it comes to HID bulbs, the capsule alignment is even more important than anything else. The glass capsule of the VX35 is surrounded by a OEM-type metal frame. The result having this structure equalize distribution of light, while improving accuracy of the focus point. 

    Value: It’s notorious that when comes to aftermarket HID, “you pay for what you get”. Price even higher than some Ebay HID sets, but in comparison to something like the Osram CBI or Philips XV D2S bulbs, the bang for the buck here is absolutely unbeatable.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $50.00
  • D2H V35
    D2H V35

    D2H: VIKOM V35 HID

    DESCRIPTION

    The Vikom V35 D2H bulbs are outstanding against the bulbs that come standard in most aftermarket HID kits. The bulb features a full range of Kelvin ratings, excellent precision, and low UV output.More

    Kelvin & Luminosity: At the heart of V35 HIDs, is the metal halide from the US, housed by the anti-UV quartz glass tube from Germany, to ensure the optimized Lumens output at every kelvin ratings. (3K/4K/5K/6K)

    Precise: When comes to HID, the alignment of the glass optics is sensitive towards their performance. V35 HID structures a ceramic base holding glass capsule keeping everything properly aligned. For maintenance of the safety driving environment, we highly recommended use in projector based headlights.

    Weather Proof: Integrated rubber housing caps segregate the bulbs from external, eliminating any water damage to the bulbs. 

    Worth it: Priced almost as much as a full eBay HID kit, we understand these are pricey. But, you do pay for what you get here. Better quality, better performance.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $40.00
  • H1 V35
    H1 V35

    H1: VIKOM V35 HID

    DESCRIPTION

    The Vikom V35 H1 bulbs are outstanding against the bulbs that come standard in most aftermarket HID kits. The bulb features a full range of Kelvin ratings, excellent precision, and low UV output.More

    Kelvin & Luminosity: At the heart of V35 HIDs, is the metal halide from the US, housed by the anti-UV quartz glass tube from Germany, to ensure the optimized Lumens output at every kelvin ratings. (3K/4K/5K/6K)

    Precise: When comes to HID, the alignment of the glass optics is sensitive towards their performance. V35 HID structures a ceramic base holding glass capsule keeping everything properly aligned. For maintenance of the safety driving environment, we highly recommended use in projector based headlights.

    Weather Proof: Integrated rubber housing caps segregate the bulbs from external, eliminating any water damage to the bulbs. 

    Worth it: Priced almost as much as a full eBay HID kit, we understand these are pricey. But, you do pay for what you get here. Better quality, better performance.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $40.00
  • xmorimoto_h1_xb_hid_bulbs_1_4_2-jpg-pagespeed-ic-hyg8dxwdix
    xmorimoto_h1_xb_hid_bulbs_1_4_2-jpg-pagespeed-ic-hyg8dxwdix

    H1: MORIMOTO XB HID

    DESCRIPTION

    Looking for the absolute best performing H1 HID setup? The Morimoto XB HID bulbs will deliver. Compatible with 35W and 55W: The XB’s will produce more lumens, last longer, project farther, and look better doing it.More

    Luminosity: At the heart of the XB H1 bulbs is their perfectly aligned 100% Philips Quartz glass that houses a capsule from APL-USA. Using high quality halide salts from German-supplier Messer; the bulbs produce nearly the same luminosity (intensity) as the amazing Osram CBI bulbs at 5500K. No, you’re not seeing things here, but yes you will be seeing everything at night. In our comparison to the big brands; Morimoto’s XB capsule (used on all XB Bulbs) ran with the best of em!

    Long Life: The Austrian-sourced Plansee electrodes help keep the bulbs running brighter for longer. Compared to a Philips bulb for example, that will lose 14% of it’s luminosity after 200 hours of use, the XB’s will lose just 17% – which is unheard of for an aftermarket bulb.

    Precise Alignment: When it comes to HID bulbs, the capsule alignment is even more important than anything else. The glass capsule of the XB HID is surrounded by a OEM-type metal frame. The result having this structure equalize distribution of light, while improving accuracy of the focus point. 

    Reliability: Not that we recommend this for any HID bulb, but go ahead and fire it up 100 times in a row or even run it underwater for days at a time and the difference between the XB and any so called “competition” will be clear. These bulbs will even work with OEM Nissan/Infiniti (Matsushita) ballasts, which are notorious for discriminating against anything aftermarket.

    Value: When it comes to aftermarket HID bulbs, the saying “you pay for what you get” has never been more appropriate, but in comparison to something like the superb Osram CBI or Philips XV D2S bulbs, the bang for the buck here is absolutely unbeatable.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $70.00
  • morimoto_h3c_xb_hid_bulbs_1_5
    morimoto_h3c_xb_hid_bulbs_1_5

    H3C: VIKOM V35 HID

    DESCRIPTION

    Looking for the absolute best performing H3 HID setup? The Morimoto XB HID bulbs will deliver. Compatible with 35W and 55W: The XB’s will produce more lumens, last longer, project farther, and look better doing it.More

    Luminosity: At the heart of the XB H3C bulbs is their perfectly aligned 100% Philips Quartz glass that houses a capsule from APL-USA. Using high quality halide salts from German-supplier Messer; the bulbs produce nearly the same luminosity (intensity) as the amazing Osram CBI bulbs at 5500K. No, you’re not seeing things here, but yes you will be seeing everything at night. In our comparison to the big brands; Morimoto’s XB capsule (used on all XB Bulbs) ran with the best of em!

    Long Life: The Austrian-sourced Plansee electrodes help keep the bulbs running brighter for longer. Compared to a Philips bulb for example, that will lose 14% of it’s luminosity after 200 hours of use, the XB’s will lose just 17% – which is unheard of for an aftermarket bulb.

    Precise Alignment: When it comes to HID bulbs, the capsule alignment is even more important than anything else. The glass capsule of the XB HID is surrounded by a OEM-type metal frame. The result having this structure equalize distribution of light, while improving accuracy of the focus point. 

    Reliability: Not that we recommend this for any HID bulb, but go ahead and fire it up 100 times in a row or even run it underwater for days at a time and the difference between the XB and any so called “competition” will be clear. These bulbs will even work with OEM Nissan/Infiniti (Matsushita) ballasts, which are notorious for discriminating against anything aftermarket.

    Value: When it comes to aftermarket HID bulbs, the saying “you pay for what you get” has never been more appropriate, but in comparison to something like the superb Osram CBI or Philips XV D2S bulbs, the bang for the buck here is absolutely unbeatable.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $70.00
  • H7 V35
    H7 V35

    H7: VIKOM V35 HID

    DESCRIPTION

    The Vikom V35 H7 bulbs are outstanding against the bulbs that come standard in most aftermarket HID kits. The bulb features a full range of Kelvin ratings, excellent precision, and low UV output.More

    Kelvin & Luminosity: At the heart of V35 HIDs, is the metal halide from the US, housed by the anti-UV quartz glass tube from Germany, to ensure the optimized Lumens output at every kelvin ratings. (3K/4K/5K/6K)

    Precise: When comes to HID, the alignment of the glass optics is sensitive towards their performance. V35 HID structures a ceramic base holding glass capsule keeping everything properly aligned. For maintenance of the safety driving environment, we highly recommended use in projector based headlights.

    Weather Proof: Integrated rubber housing caps segregate the bulbs from external, eliminating any water damage to the bulbs. 

    Worth it: Priced almost as much as a full eBay HID kit, we understand these are pricey. But, you do pay for what you get here. Better quality, better performance.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $40.00
  • morimoto_h7_xb_hid_bulbs_1_6_1
    morimoto_h7_xb_hid_bulbs_1_6_1

    H7: MORIMOTO XB HID

    DESCRIPTION

    Looking for the absolute best performing H7 HID setup? The Morimoto XB HID bulbs will deliver. Compatible with 35W and 55W: The XB’s will produce more lumens, last longer, project farther, and look better doing it.More

    Luminosity: At the heart of the XB H7 bulbs is their perfectly aligned 100% Philips Quartz glass that houses a capsule from APL-USA. Using high quality halide salts from German-supplier Messer; the bulbs produce nearly the same luminosity (intensity) as the amazing Osram CBI bulbs at 5500K. No, you’re not seeing things here, but yes you will be seeing everything at night. In our comparison to the big brands; Morimoto’s XB capsule (used on all XB Bulbs) ran with the best of em!

    Long Life: The Austrian-sourced Plansee electrodes help keep the bulbs running brighter for longer. Compared to a Philips bulb for example, that will lose 14% of it’s luminosity after 200 hours of use, the XB’s will lose just 17% – which is unheard of for an aftermarket bulb.

    Precise Alignment: When it comes to HID bulbs, the capsule alignment is even more important than anything else. The glass capsule of the XB HID is surrounded by a OEM-type metal frame. The result having this structure equalize distribution of light, while improving accuracy of the focus point. 

    Reliability: Not that we recommend this for any HID bulb, but go ahead and fire it up 100 times in a row or even run it underwater for days at a time and the difference between the XB and any so called “competition” will be clear. These bulbs will even work with OEM Nissan/Infiniti (Matsushita) ballasts, which are notorious for discriminating against anything aftermarket.

    Value: When it comes to aftermarket HID bulbs, the saying “you pay for what you get” has never been more appropriate, but in comparison to something like the superb Osram CBI or Philips XV D2S bulbs, the bang for the buck here is absolutely unbeatable.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $70.00
  • H8 V35
    H8 V35

    H8: VIKOM V35 HID

    DESCRIPTION

    The Vikom V35 H8 bulbs are outstanding against the bulbs that come standard in most aftermarket HID kits. The bulb features a full range of Kelvin ratings, excellent precision, and low UV output.More

    Kelvin & Luminosity: At the heart of V35 HIDs, is the metal halide from the US, housed by the anti-UV quartz glass tube from Germany, to ensure the optimized Lumens output at every kelvin ratings. (3K/4K/5K/6K)

    Precise: When comes to HID, the alignment of the glass optics is sensitive towards their performance. V35 HID structures a ceramic base holding glass capsule keeping everything properly aligned. For maintenance of the safety driving environment, we highly recommended use in projector based headlights.

    Weather Proof: Integrated rubber housing caps segregate the bulbs from external, eliminating any water damage to the bulbs. 

    Worth it: Priced almost as much as a full eBay HID kit, we understand these are pricey. But, you do pay for what you get here. Better quality, better performance.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $40.00
  • morimoto_h8_h9_h11b_xb_hid_bulbs_1_12_1
    morimoto_h8_h9_h11b_xb_hid_bulbs_1_12_1

    H9: morimoto V35 HID

    DESCRIPTION

    Looking for the absolute best performing H9 HID setup? The Morimoto XB HID bulbs will deliver. Compatible with 35W and 55W: The XB’s will produce more lumens, last longer, project farther, and look better doing it.More

    Luminosity: At the heart of the XB H9 bulbs is their perfectly aligned 100% Philips Quartz glass that houses a capsule from APL-USA. Using high quality halide salts from German-supplier Messer; the bulbs produce nearly the same luminosity (intensity) as the amazing Osram CBI bulbs at 5500K. No, you’re not seeing things here, but yes you will be seeing everything at night. In our comparison to the big brands; Morimoto’s XB capsule (used on all XB Bulbs) ran with the best of em!

    Long Life: The Austrian-sourced Plansee electrodes help keep the bulbs running brighter for longer. Compared to a Philips bulb for example, that will lose 14% of it’s luminosity after 200 hours of use, the XB’s will lose just 17% – which is unheard of for an aftermarket bulb.

    Precise Alignment: When it comes to HID bulbs, the capsule alignment is even more important than anything else. The glass capsule of the XB HID is surrounded by a OEM-type metal frame. The result having this structure equalize distribution of light, while improving accuracy of the focus point. 

    Reliability: Not that we recommend this for any HID bulb, but go ahead and fire it up 100 times in a row or even run it underwater for days at a time and the difference between the XB and any so called “competition” will be clear. These bulbs will even work with OEM Nissan/Infiniti (Matsushita) ballasts, which are notorious for discriminating against anything aftermarket.

    Value: When it comes to aftermarket HID bulbs, the saying “you pay for what you get” has never been more appropriate, but in comparison to something like the superb Osram CBI or Philips XV D2S bulbs, the bang for the buck here is absolutely unbeatable.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $70.00
  • 9005 V35
    9005 V35

    H10: VIKOM V35 HID

    DESCRIPTION

    The Vikom V35 H10 bulbs are outstanding against the bulbs that come standard in most aftermarket HID kits. The bulb features a full range of Kelvin ratings, excellent precision, and low UV output.More

    Kelvin & Luminosity: At the heart of V35 HIDs, is the metal halide from the US, housed by the anti-UV quartz glass tube from Germany, to ensure the optimized Lumens output at every kelvin ratings. (3K/4K/5K/6K)

    Precise: When comes to HID, the alignment of the glass optics is sensitive towards their performance. V35 HID structures a ceramic base holding glass capsule keeping everything properly aligned. For maintenance of the safety driving environment, we highly recommended use in projector based headlights.

    Weather Proof: Integrated rubber housing caps segregate the bulbs from external, eliminating any water damage to the bulbs. 

    Worth it: Priced almost as much as a full eBay HID kit, we understand these are pricey. But, you do pay for what you get here. Better quality, better performance.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $40.00
  • morimoto_h8_h9_h11b_xb_hid_bulbs_1_12_1
    morimoto_h8_h9_h11b_xb_hid_bulbs_1_12_1

    H11a: MORIMOTO XB HID

    DESCRIPTION

    Looking for the absolute best performing H11 HID setup? The Morimoto XB HID bulbs will deliver. Compatible with 35W and 55W: The XB’s will produce more lumens, last longer, project farther, and look better doing it.More

    Luminosity: At the heart of the XB H11 bulbs is their perfectly aligned 100% Philips Quartz glass that houses a capsule from APL-USA. Using high quality halide salts from German-supplier Messer; the bulbs produce nearly the same luminosity (intensity) as the amazing Osram CBI bulbs at 5500K. No, you’re not seeing things here, but yes you will be seeing everything at night. In our comparison to the big brands; Morimoto’s XB capsule (used on all XB Bulbs) ran with the best of em!

    Long Life: The Austrian-sourced Plansee electrodes help keep the bulbs running brighter for longer. Compared to a Philips bulb for example, that will lose 14% of it’s luminosity after 200 hours of use, the XB’s will lose just 17% – which is unheard of for an aftermarket bulb.

    Precise Alignment: When it comes to HID bulbs, the capsule alignment is even more important than anything else. The glass capsule of the XB HID is surrounded by a OEM-type metal frame. The result having this structure equalize distribution of light, while improving accuracy of the focus point. 

    Reliability: Not that we recommend this for any HID bulb, but go ahead and fire it up 100 times in a row or even run it underwater for days at a time and the difference between the XB and any so called “competition” will be clear. These bulbs will even work with OEM Nissan/Infiniti (Matsushita) ballasts, which are notorious for discriminating against anything aftermarket.

    Value: When it comes to aftermarket HID bulbs, the saying “you pay for what you get” has never been more appropriate, but in comparison to something like the superb Osram CBI or Philips XV D2S bulbs, the bang for the buck here is absolutely unbeatable.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $70.00
  • morimoto_h8_h9_h11b_xb_hid_bulbs_1_12_1
    morimoto_h8_h9_h11b_xb_hid_bulbs_1_12_1

    H11b: MORIMOTO XB HID

    DESCRIPTION

    Looking for the absolute best performing H11 HID setup? The Morimoto XB HID bulbs will deliver. Compatible with 35W and 55W: The XB’s will produce more lumens, last longer, project farther, and look better doing it.More

    Luminosity: At the heart of the XB H11 bulbs is their perfectly aligned 100% Philips Quartz glass that houses a capsule from APL-USA. Using high quality halide salts from German-supplier Messer; the bulbs produce nearly the same luminosity (intensity) as the amazing Osram CBI bulbs at 5500K. No, you’re not seeing things here, but yes you will be seeing everything at night. In our comparison to the big brands; Morimoto’s XB capsule (used on all XB Bulbs) ran with the best of em!

    Long Life: The Austrian-sourced Plansee electrodes help keep the bulbs running brighter for longer. Compared to a Philips bulb for example, that will lose 14% of it’s luminosity after 200 hours of use, the XB’s will lose just 17% – which is unheard of for an aftermarket bulb.

    Precise Alignment: When it comes to HID bulbs, the capsule alignment is even more important than anything else. The glass capsule of the XB HID is surrounded by a OEM-type metal frame. The result having this structure equalize distribution of light, while improving accuracy of the focus point. 

    Reliability: Not that we recommend this for any HID bulb, but go ahead and fire it up 100 times in a row or even run it underwater for days at a time and the difference between the XB and any so called “competition” will be clear. These bulbs will even work with OEM Nissan/Infiniti (Matsushita) ballasts, which are notorious for discriminating against anything aftermarket.

    Value: When it comes to aftermarket HID bulbs, the saying “you pay for what you get” has never been more appropriate, but in comparison to something like the superb Osram CBI or Philips XV D2S bulbs, the bang for the buck here is absolutely unbeatable.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    $70.00
  • H8 V35
    H8 V35

    H16: VIKOM V35 HID

    DESCRIPTION

    The Vikom V35 H16 bulbs are outstanding against the bulbs that come standard in most aftermarket HID kits. The bulb features a full range of Kelvin ratings, excellent precision, and low UV output.More

    Kelvin & Luminosity: At the heart of V35 HIDs, is the metal halide from the US, housed by the anti-UV quartz glass tube from Germany, to ensure the optimized Lumens output at every kelvin ratings. (3K/4K/5K/6K)

    Precise: When comes to HID, the alignment of the glass optics is sensitive towards their performance. V35 HID structures a ceramic base holding glass capsule keeping everything properly aligned. For maintenance of the safety driving environment, we highly recommended use in projector based headlights.

    Weather Proof: Integrated rubber housing caps segregate the bulbs from external, eliminating any water damage to the bulbs. 

    Worth it: Priced almost as much as a full eBay HID kit, we understand these are pricey. But, you do pay for what you get here. Better quality, better performance.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $40.00
  • xmorimoto_9005_xb_hid_bulbs_1_1-jpg-pagespeed-ic-natzszeycl
    xmorimoto_9005_xb_hid_bulbs_1_1-jpg-pagespeed-ic-natzszeycl

    9005: MORIMOTO V35 HID

    DESCRIPTION

    Looking for the absolute best performing 9005 HID setup? The Morimoto XB HID bulbs will deliver. Compatible with 35W and 55W: The XB’s will produce more lumens, last longer, project farther, and look better doing it.More

    Luminosity: At the heart of the XB 9005 bulbs is their perfectly aligned 100% Philips Quartz glass that houses a capsule from APL-USA. Using high quality halide salts from German-supplier Messer; the bulbs produce nearly the same luminosity (intensity) as the amazing Osram CBI bulbs at 5500K. No, you’re not seeing things here, but yes you will be seeing everything at night. In our comparison to the big brands; Morimoto’s XB capsule (used on all XB Bulbs) ran with the best of em!

    Long Life: The Austrian-sourced Plansee electrodes help keep the bulbs running brighter for longer. Compared to a Philips bulb for example, that will lose 14% of it’s luminosity after 200 hours of use, the XB’s will lose just 17% – which is unheard of for an aftermarket bulb.

    Precise Alignment: When it comes to HID bulbs, the capsule alignment is even more important than anything else. The glass capsule of the XB HID is surrounded by a OEM-type metal frame. The result having this structure equalize distribution of light, while improving accuracy of the focus point. 

    Reliability: Not that we recommend this for any HID bulb, but go ahead and fire it up 100 times in a row or even run it underwater for days at a time and the difference between the XB and any so called “competition” will be clear. These bulbs will even work with OEM Nissan/Infiniti (Matsushita) ballasts, which are notorious for discriminating against anything aftermarket.

    Value: When it comes to aftermarket HID bulbs, the saying “you pay for what you get” has never been more appropriate, but in comparison to something like the superb Osram CBI or Philips XV D2S bulbs, the bang for the buck here is absolutely unbeatable.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $70.00
  • xmorimoto_9005_xb_hid_bulbs_1_1-jpg-pagespeed-ic-natzszeycl
    xmorimoto_9005_xb_hid_bulbs_1_1-jpg-pagespeed-ic-natzszeycl

    9006: MORIMOTO V35 HID

    DESCRIPTION

    Looking for the absolute best performing 9006 HID setup? The Morimoto XB HID bulbs will deliver. Compatible with 35W and 55W: The XB’s will produce more lumens, last longer, project farther, and look better doing it.More

    Luminosity: At the heart of the XB 9006 bulbs is their perfectly aligned 100% Philips Quartz glass that houses a capsule from APL-USA. Using high quality halide salts from German-supplier Messer; the bulbs produce nearly the same luminosity (intensity) as the amazing Osram CBI bulbs at 5500K. No, you’re not seeing things here, but yes you will be seeing everything at night. In our comparison to the big brands; Morimoto’s XB capsule (used on all XB Bulbs) ran with the best of em!

    Long Life: The Austrian-sourced Plansee electrodes help keep the bulbs running brighter for longer. Compared to a Philips bulb for example, that will lose 14% of it’s luminosity after 200 hours of use, the XB’s will lose just 17% – which is unheard of for an aftermarket bulb.

    Precise Alignment: When it comes to HID bulbs, the capsule alignment is even more important than anything else. The glass capsule of the XB HID is surrounded by a OEM-type metal frame. The result having this structure equalize distribution of light, while improving accuracy of the focus point. 

    Reliability: Not that we recommend this for any HID bulb, but go ahead and fire it up 100 times in a row or even run it underwater for days at a time and the difference between the XB and any so called “competition” will be clear. These bulbs will even work with OEM Nissan/Infiniti (Matsushita) ballasts, which are notorious for discriminating against anything aftermarket.

    Value: When it comes to aftermarket HID bulbs, the saying “you pay for what you get” has never been more appropriate, but in comparison to something like the superb Osram CBI or Philips XV D2S bulbs, the bang for the buck here is absolutely unbeatable.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $70.00
  • 9006 VX35
    9006 VX35

    9012: VIKOM V35 HID

    DESCRIPTION

    The Vikom V35 9012 bulbs are outstanding against the bulbs that come standard in most aftermarket HID kits. The bulb features a full range of Kelvin ratings, excellent precision, and low UV output.More

    Kelvin & Luminosity: At the heart of V35 HIDs, is the metal halide from the US, housed by the anti-UV quartz glass tube from Germany, to ensure the optimized Lumens output at every kelvin ratings. (3K/4K/5K/6K)

    Precise: When comes to HID, the alignment of the glass optics is sensitive towards their performance. V35 HID structures a ceramic base holding glass capsule keeping everything properly aligned. For maintenance of the safety driving environment, we highly recommended use in projector based headlights.

    Weather Proof: Integrated rubber housing caps segregate the bulbs from external, eliminating any water damage to the bulbs. 

    Worth it: Priced almost as much as a full eBay HID kit, we understand these are pricey. But, you do pay for what you get here. Better quality, better performance.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $40.00
  • 5202 V35
    5202 V35

    5202 / 2504: VIKOM V35 HID

    DESCRIPTION

    The Vikom V35 5202 bulbs are outstanding against the bulbs that come standard in most aftermarket HID kits. The bulb features a full range of Kelvin ratings, excellent precision, and low UV output.More

    Kelvin & Luminosity: At the heart of V35 HIDs, is the metal halide from the US, housed by the anti-UV quartz glass tube from Germany, to ensure the optimized Lumens output at every kelvin ratings. (3K/4K/5K/6K)

    Precise: When comes to HID, the alignment of the glass optics is sensitive towards their performance. V35 HID structures a ceramic base holding glass capsule keeping everything properly aligned. For maintenance of the safety driving environment, we highly recommended use in projector based headlights.

    Weather Proof: Integrated rubber housing caps segregate the bulbs from external, eliminating any water damage to the bulbs. 

    Worth it: Priced almost as much as a full eBay HID kit, we understand these are pricey. But, you do pay for what you get here. Better quality, better performance.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $40.00
  • 880 V35
    880 V35

    880: VIKOM V35 HID

    DESCRIPTION

    The Vikom V35 880 bulbs are outstanding against the bulbs that come standard in most aftermarket HID kits. The bulb features a full range of Kelvin ratings, excellent precision, and low UV output.More

    Kelvin & Luminosity: At the heart of V35 HIDs, is the metal halide from the US, housed by the anti-UV quartz glass tube from Germany, to ensure the optimized Lumens output at every kelvin ratings. (3K/4K/5K/6K)

    Precise: When comes to HID, the alignment of the glass optics is sensitive towards their performance. V35 HID structures a ceramic base holding glass capsule keeping everything properly aligned. For maintenance of the safety driving environment, we highly recommended use in projector based headlights.

    Weather Proof: Integrated rubber housing caps segregate the bulbs from external, eliminating any water damage to the bulbs. 

    Worth it: Priced almost as much as a full eBay HID kit, we understand these are pricey. But, you do pay for what you get here. Better quality, better performance.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $40.00
  • H4 V35
    H4 V35

    H4/9003: VIKOM V35 BIXENON

    DESCRIPTION

    The Vikom V35 H4/9003 bulbs are outstanding against the bulbs that come standard in most aftermarket HID kits. The bulb features a full range of Kelvin ratings, excellent precision, and low UV output.More

    Kelvin & Luminosity: At the heart of V35 HIDs, is the metal halide from the US, housed by the anti-UV quartz glass tube from Germany, to ensure the optimized Lumens output at every kelvin ratings. (3K/4K/5K/6K)

    Precise: When comes to HID, the alignment of the glass optics is sensitive towards their performance. V35 HID structures a ceramic base holding glass capsule keeping everything properly aligned. For maintenance of the safety driving environment, we highly recommended use in projector based headlights.

    Weather Proof: Integrated rubber housing caps segregate the bulbs from external, eliminating any water damage to the bulbs. 

    Worth it: Priced almost as much as a full eBay HID kit, we understand these are pricey. But, you do pay for what you get here. Better quality, better performance.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $50.00
  • H-H1_3
    H-H1_3

    H1: HALOGEN BULBS

    DESCRIPTION

    Available in most sizes in original 3200K temperature, designed for everyday driving – a gerat accent for any high performance set of HID headlights from Vikom.More

    The UV filtered glass helps protect sensitive reflective surfaces inside your headlight housing to keep them working like new for years to come.

    Standard: OEM Standard fitment across full range of sizes allow direct Plug – n – Play replacement with stocked bulbs.

    Germany material and technology origin ensures the long life-span, and top-end quality just like Philips and Osram. You pay only 1/3 of the original line for their 95% performance – is a big bang for the buck.

    HID System / Complete retrofit upgrade: Not sufficient with the standard halogen light output? Don't go elsewhere for improvement, we have plenty of options for HID and/or Projector upgrade, that's the only reason we are here helping you see clear at night – keep yourself safe for your dear family!!

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $20.00
  • H-H7_2
    H-H7_2

    H7: HALOGEN BULBS

    DESCRIPTION

    Available in most sizes in original 3200K temperature, designed for everyday driving – a gerat accent for any high performance set of HID headlights from Vikom. More

    Durable: The UV filtered glass helps protect sensitive reflective surfaces inside your headlight housing to keep them working like new for years to come.

    Standard: OEM Standard fitment across full range of sizes allow direct Plug – n – Play replacement with stocked bulbs.

    Germany material and technology origin ensures the long life-span, and top-end quality just like Philips and Osram. You pay only 1/3 of the original line for their 95% performance – is a big bang for the buck.

    HID System / Complete retrofit upgrade: Not sufficient with the standard halogen light output? Don't go elsewhere for improvement, we have plenty of options for HID and/or Projector upgrade, that's the only reason we are here helping you see clear at night – keep yourself safe for your dear family!!

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $20.00
  • H-H11_3
    H-H11_3

    H11: HALOGEN BULBS

    DESCRIPTION

    Available in most sizes in original 3200K temperature, designed for everyday driving – a gerat accent for any high performance set of HID headlights from Vikom. More

    Durable: The UV filtered glass helps protect sensitive reflective surfaces inside your headlight housing to keep them working like new for years to come.

    Standard: OEM Standard fitment across full range of sizes allow direct Plug – n – Play replacement with stocked bulbs.

    Germany material and technology origin ensures the long life-span, and top-end quality just like Philips and Osram. You pay only 1/3 of the original line for their 95% performance – is a big bang for the buck.

    HID System / Complete retrofit upgrade: Not sufficient with the standard halogen light output? Don't go elsewhere for improvement, we have plenty of options for HID and/or Projector upgrade, that's the only reason we are here helping you see clear at night – keep yourself safe for your dear family!!

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $20.00
  • H-9005_3
    H-9005_3

    9005/HB3: HALOGEN BULBS

    DESCRIPTION

    Available in most sizes in original 3200K temperature, designed for everyday driving – a gerat accent for any high performance set of HID headlights from Vikom. More

    Durable: The UV filtered glass helps protect sensitive reflective surfaces inside your headlight housing to keep them working like new for years to come.

    Standard: OEM Standard fitment across full range of sizes allow direct Plug – n – Play replacement with stocked bulbs.

    Germany material and technology origin ensures the long life-span, and top-end quality just like Philips and Osram. You pay only 1/3 of the original line for their 95% performance – is a big bang for the buck.

    HID System / Complete retrofit upgrade: Not sufficient with the standard halogen light output? Don't go elsewhere for improvement, we have plenty of options for HID and/or Projector upgrade, that's the only reason we are here helping you see clear at night – keep yourself safe for your dear family!!

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $20.00
  • H-9006_4
    H-9006_4

    9006/HB4: HALOGEN BULBS

    DESCRIPTION

    Available in most sizes in original 3200K temperature, designed for everyday driving – a gerat accent for any high performance set of HID headlights from Vikom. More

    Durable: The UV filtered glass helps protect sensitive reflective surfaces inside your headlight housing to keep them working like new for years to come.

    Standard: OEM Standard fitment across full range of sizes allow direct Plug – n – Play replacement with stocked bulbs.

    Germany material and technology origin ensures the long life-span, and top-end quality just like Philips and Osram. You pay only 1/3 of the original line for their 95% performance – is a big bang for the buck.

    HID System / Complete retrofit upgrade: Not sufficient with the standard halogen light output? Don't go elsewhere for improvement, we have plenty of options for HID and/or Projector upgrade, that's the only reason we are here helping you see clear at night – keep yourself safe for your dear family!!

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $20.00
  • H-H4_3
    H-H4_3

    H4/9003: HALOGEN BULBS

    DESCRIPTION

    Available in most sizes in original 3200K temperature, designed for everyday driving – a gerat accent for any high performance set of HID headlights from Vikom. More

    Durable: The UV filtered glass helps protect sensitive reflective surfaces inside your headlight housing to keep them working like new for years to come.

    Standard: OEM Standard fitment across full range of sizes allow direct Plug – n – Play replacement with stocked bulbs.

    Germany material and technology origin ensures the long life-span, and top-end quality just like Philips and Osram. You pay only 1/3 of the original line for their 95% performance – is a big bang for the buck.

    HID System / Complete retrofit upgrade: Not sufficient with the standard halogen light output? Don’t go elsewhere for improvement, we have plenty of options for HID and/or Projector upgrade, that’s the only reason we are here helping you see clear at night – keep yourself safe for your dear family!!

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $20.00
  • Morimoto Mini H1 7.0 Bi-xenon Projectors 2
    Morimoto Mini H1 7.0 Bi-xenon Projectors 2

    BI-XENON: MORIMOTO MINI H1 7.0

    DESCRIPTION

    With an all-new wider and multifaceted reflector and bowl new optics pumping out the light; the ultra popular Morimoto Mini H1 projectors perform better, install easier, cost less, and fit a wider applications than ever. More

    Game Over: Morimoto has always been the benchmark when it came to the Mini H1…But no matter how many imitations popped up over the years, they just couldn’t compare, and now it’s most certainly too late to catch up. The 7.0 represents the most massive overhaul in Mini H1 history.

    Lucky #7: Let’s keep it simple and make a list of everything new about the 7.0. The optically clear lens. The 7-signed metal lens holder. The side-push bi-xenon solenoid mechanism. The die-cast radically curved cutoff shield. The foreground limiter. The reflector bowl. The IR, high-temp resistant reflector finish. The threaded shaft and it’s precision and added length. The results! The beam is wider. The distribution of light more proper. Your ability to see is better.

    Easy to Install: Now even easier to install with a longer threaded shaft compared to the 6.0! Their amazing ease of installation relative to the amount of performance they produce makes them our most popular projector. Simply remove headlight lens, insert the threaded mounting shaft through the pre-existing hole in the back of the reflector, hand-tighten, check rotation, tighten, and re-seal headlights. Minimal cutting involved. (if any!) Check out the Installation Procedure

    Performance Shootout: With the most modern optics, an optically clear lens, and their curved cutoff shield; The 7.0 will outshine almost every OEM HID projector on the market and go head to head with the legendary S2000 projectors! (which cost 3x as much, are much harder to retrofit, and don’t even have a high beam) Their wide, uniformly lit low beam stays intense all the way to the outer limits. Their bi-xenon high beam provides an insane amount of additonal light on demand.

    Standard Equipped: With your choice of either Mini Gatling Gun or Mini Graphite shrouds to keep things compact and easy to assemble. Full size shrouds are also compatible with the Mini’s using the centric rings.

    User-Approved: By satisfied enthusiasts with all kinds of cars and trucks. With a quick and easy search we pulled up install examples (1,2,3,4,5) of the previous gen Morimoto Mini H1 Projectors! If you’re looking for inspiration for your retrofit, keep reading!

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    From: $185.00
  • morimoto_mini_d2s_4
    morimoto_mini_d2s_4

    BI-XENON: MORIMOTO MINI D2S 4.0

    DESCRIPTION

    ONE TWO THREE: Four! Truth be told, for a bunch of headlight nerds: We could not imagine a more perfect projector. The all-new Morimoto Mini D2S 4.0 Bi-xenon takes the cake in every category. More

    A supreme low beam. A High beam so bright it's unholy. A cutoff line that can't get any sharper. Quality that nobody can question, and an undeniable ease of installation. If we died and went to headlight heaven, this thing would be greeting us at the gate.

    LEGENDARY: When Morimoto's Mini D2S 3.0 came out in 2013, it changed the game. When the Mini H1 7.0 launched in 2015, it changed the game. The Mini D2S 4.0 carries on the tradition – and why? Not only does it make the 3.0 look like an old dinosaur…but because it's powered by D2S bulbs; it's capable of taking the awesome optics developed for the H1 7.0 to a whole new level.

    OUTPUT: We'll just start with the hotspot. It's brighter than any bi-xenon projector we've tested…in fact, it's so bright that it exceeds the maximum amount of intensity allowed by DOT even at 35W. (because #regulations) The beam pattern is extremely wide and flat, with none of the bowing found on the 3.0…all thanks to the beauty in the center of this beast: it's curved cutoff shield. The Kuria Optic clear lens helps produce plenty of color flicker, but also a razor sharo cutoff line that eliminates all glare to oncoming traffic. Last but not least, the high beam. Shaped by the secondary cutoff shield, there's plenty of light reserved for use here to penetrate for hundreds of meters at night.

    PHYSICALLY SPEAKING: Output isn't the only thing the 4.0 gets praise for. It's clear they've paid a lot of attention to the physical attributes too. The threaded shaft is longer than before, making it easier to install, and it's threads are silky smooth (near impossible to strip). The bi-xenon solenoid mechanism has next to no slack, and thankfully this time, the solenoid input actually plug into the back of the projector. The black lens holder gets the cool “4” cut out too! OEM Quality, aftermarket performance. We like it!

    EASY TO INSTALL: Picking out a projector always meant striking a balance between a) how much light output you wanted, and 2) how much time and effort you were willing to afford to get it done. The Morimoto Mini D2S 4.0 sacrifices nothing in the light output department while remaining amazingly easy to install. Unfortunately for big ass bi-xenon projectors like the Acura TL, Murano, or FX-R; there's really no reason to cut, trim, and JB Weld the hell out of everything just to achieve output nirvana, and it probably wont be long until they find a new home in our closeout category.

    INSTALLATION SUMMARY:On a H4-based headlight reflector for example…Remove the headlight lens, insert the threaded mounting shaft through the pre-existing hole in the back of the reflector, add the alignment plate, tightne the lock ring, and re-seal the headlights. For other applications, minimal cutting will probably be involved but you'll find the results well worth it!

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    From: $200.00
  • FX-R Bi-xenon Projectors 1
    FX-R Bi-xenon Projectors 1

    BI-XENON: MORIMOTO FX-R 3.0

    DESCRIPTION

    The FX-R 3.0 is a retrofitters delight with its high precision castings, advanced optics, and the standard 3″ Optical clear lens. It all adds up to put the Morimoto FX-R 3.0 near the top of the lighting totem poll.More

    Well-Rounded: When you consider a full size projector on the basis of light output, out of the box readiness, fitment in most applications, and value; the FX-R easily takes the cake.

    Easy to Install: Amazing ease of installation relative to the amount of performance they produce; no D2S-based projector can really compare. They produce a very wide beam pattern with a perfect distribution of light and top it off with a supremely sharp cutoff that will blow your mind. We’re gonna go ahead and say not many projectors will out-shine the D2S 3.0 on the road and to be honest, FX-R sales have on the decline since these launched.

    Installation Summary: Park car, mark stock beam-height on wall, disassemble headlight, cut original reflector to fit projector in place, re-mount modified headlights without lens cover, illuminate projector, then tack it into place using the reference height/level using epoxy gum.

    Performance Highlights: More light! With a pre-installed clear lens and DOT stepped cutoff shield that’s been tuned in-house, the FX-R 3.0 is a stand out. Their advanced internal optics create a wide beam pattern with a uniform distribution of light that cuts through darkness like a laser. They have one of the straightest, sharpest, and most vibrantly colored cutoff lines of any projector in existence and a high beam that will penetrate for hundreds of yards.

    Tuned Up: Each Morimoto projector is individually tested and hand-tuned to perfection to ensure nothing but the best output.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    From: $140.00
  • g-2
    g-2

    STANDARD BI-XENON PROJECTORS (H1 )

    DESCRIPTION

    Need a budget retrofit projector headlight? These standard version of the well-known Mini H1 projectors would be a good choice for you.More

    **ALL CLOSEOUTS SUBJECT TO THE TERMS: ALL CLOSEOUT PARTS MAY VARY ON ACTUAL CONDITION/STYLE/INCLUSIONS. NO GUARANTEES. NO WARRANTIES. NO RETURN. ALL SALES ARE FINAL.

    Just like all selling on Ebay, Alibaba, or Amazon, having some fancy way of describing the “Generic”. If it ain't Morimoto / Vikom, it is literally the same thing, so take from us. If you are look for a budget bi-xenon retrofit: the standard old version of the classic Mini H1 is your good option.

    These projectors are factory-direct and do not receive our proprietary in-house tuning process. However, their pre-installed optically clear lens should give them a nice sharp and colorful cutoff line and good output.

    The H1 Bi-xenons are low and high beam capable, are made for use with H1 HID bulbs, and are directly compatible with cars that originally came with H7 and H4 headlights (no modification required)

    Your choice to add shrouds to the package, either 2.5″ mini Gatling or 3″ full sized design. Please note: Centric rings are recommended for all except Mini Gatling. 

    We will always make our best effort to accurately describe an item, but please note that all “closeout” parts are not guaranteed in any way and all sales are final.

    5.00 out of 5
    $60.00
  • CENTRIC RING 3
    CENTRIC RING 3

    SHROUD CENTRIC RINGS

    DESCRIPTION

    Designed specifically for 2.5″ MiniH1 projector and most common shrouds with 3″ openings to fit 2.5″ projectors. Included at no extra cost when you order both shrouds and projectors.More

    Installation: Snaps into the circular flange on the backside of the shrouds, and fits tight over the front lens frame of the projectors for a perfect fit.

    NOTE:We do recommend adding epoxy/silicone in between surfaces to ensure vibration never shakes them loose. Yes their friction-fit is tight, but better safe than sorry!

    NOTE: Will not fit E46-R or Gatling Gun 2.0 shrouds without modification.

    Free: Included at no charge when you order both premium shrouds and a set of compatible projectors from Vikom for simple, instant, and effective mounting.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $15.00
  • Morimoto Apollo Shroud
    Morimoto Apollo Shroud

    APOLLO 1.0

    DESCRIPTION

    A fully circular shroud perfect for filling out in bigger headlights. Inspired by the Porsche Cayenne. The Apollo’s have a beautiful smooth chrome finish factory-look.More

    In Comparison: Don’t make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: our shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheap-o’s out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off.

    Mounting: Centric Rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the of the shroud to reduce inside diameter, making them more of a “press fit” onto the lens holder of the projector. JB Quik Weld is also recommended in order to prevent the shrouds from vibrating loose over time.

    LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The all new XB LED systems are easy to mount on the front of your shrouds, are reliable, and of course, awesome looking. Our convenient Size Guide makes picking out the right diameter easy! These shrouds feature DRL-Vents that will glow with light if you wanted to do something a bit different and mount the halos inside.

    Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it’s normal. Luckily, they’re made of plastic – making that easily possible. We recommend Dremel EZ Lock cutting wheels to make the job easy.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    From: $50.00
  • Apollo 2.0 Shrouds 1
    Apollo 2.0 Shrouds 1

    APOLLO 2.0

    DESCRIPTION

    Inspired from modern Porsche headlights home. The Apollo 2.0’s have clean lines, smooth contours, and a design that works really well with our amazingly bright 100mm LED halos.More

    Design: Bring the exotic design from modern Porsche headlights home with these fresh shrouds. The Apollo 2.0’s have a beautiful smooth chrome finish that is accented by textured face for a unique and attractive look.

    In Comparison: Don’t make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: our shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheap-o’s out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off.

    Mounting: Centric Rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the of the shroud to reduce inside diameter, making them more of a “press fit” onto the lens holder of the projector. JB Quik Weld is also recommended in order to prevent the shrouds from vibrating loose over time.

    LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The all new XB LED systems are easy to mount on the front of your shrouds, are reliable, and of course, awesome looking. Our convenient Size Guide makes picking out the right diameter easy! These shrouds feature DRL-Vents that will glow with light if you wanted to do something a bit different and mount the halos inside.

    Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it’s normal. Luckily, they’re made of plastic – making that easily possible. We recommend Dremel EZ Lock cutting wheels to make the job easy.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    From: $50.00
  • Apollo 3.0 Shrouds 1
    Apollo 3.0 Shrouds 1

    APOLLO 3.0

    DESCRIPTION

    The Apollo 3.0 is the third Porsche inspired shroud to join the Apollo family. With excellent projector coverage, great looks, and perfect integration with our 100mm LED halos.More

    Design: With a smooth chrome finish that accents its mutli-facet design well, the Apollo 3.0 fits well in a wide variety of retrofits on vehicles with round reflectors. Whether you're working on a car or a truck with big headlights, consider the Apollo 3.0 as a solid choice.

    In Comparison: Don't make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: our shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheap-o's out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off.

    Mounting: Centric Rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the of the shroud to reduce inside diameter, making them more of a “press fit” onto the lens holder of the projector. JB Quik Weld is also recommended in order to prevent the shrouds from vibrating loose over time.

    LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The all new XB LED systems are easy to mount on the front of your shrouds, are reliable, and of course, awesome looking. Our convenient Size Guide makes picking out the right diameter easy! These shrouds feature DRL-Vents that will glow with light if you wanted to do something a bit different and mount the halos inside.

    Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it's normal. Luckily, they're made of plastic – making that easily possible. We recommend Dremel EZ Lock cutting wheels to make the job easy.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    From: $50.00
  • E46-R Shrouds 1
    E46-R Shrouds 1

    E46-R

    DESCRIPTION

    Released by TRS in early 2008, E46-R is a most classic shroud with unmatched versatility, it fits wide variety of projectors and headlight shapes, inspired by the BMW E46 M3.More

    In Comparison: Don't make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: our shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheap-o's out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off.

    Mounting: Centric Rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the of the shroud to reduce inside diameter, making them more of a “press fit” onto the lens holder of the projector. JB Quik Weld is also recommended in order to prevent the shrouds from vibrating loose over time.

    LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The all new XB LED systems are easy to mount on the front of your shrouds, are reliable, and of course, awesome looking. Our convenient Size Guide makes picking out the right diameter easy! These shrouds feature DRL-Vents that will glow with light if you wanted to do something a bit different and mount the halos inside.

    Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it's normal. Luckily, they're made of plastic – making that easily possible. We recommend Dremel EZ Lock cutting wheels to make the job easy.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    From: $50.00
  • E46-R Extended Shrouds 1
    E46-R Extended Shrouds 1

    E46-R EXTENDED

    DESCRIPTION

    An extended version of the standard E46-R shroud, inspired by the BMW E46. Compared to the E46-R, The “Extended” version has the dimples arrayed around in a full circle.More

    In Comparison: Don't make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: our shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheap-o's out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off.

    Mounting: Centric Rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the of the shroud to reduce inside diameter, making them more of a “press fit” onto the lens holder of the projector. JB Quik Weld is also recommended in order to prevent the shrouds from vibrating loose over time.

    LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The all new XB LED systems are easy to mount on the front of your shrouds, are reliable, and of course, awesome looking. Our convenient Size Guide makes picking out the right diameter easy! These shrouds feature DRL-Vents that will glow with light if you wanted to do something a bit different and mount the halos inside.

    Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it's normal. Luckily, they're made of plastic – making that easily possible. We recommend Dremel EZ Lock cutting wheels to make the job easy.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    From: $50.00
  • Morimoto Gatling Gun Shroud
    Morimoto Gatling Gun Shroud

    GATLING GUN

    DESCRIPTION

    Inspired by a machine gun, these shrouds have Integrated lighting vents, textured metalli finish, and a modern design all combine to give the Gatling Gun shrouds their unique appeal.More

    In Comparison: Don’t make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: our shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheap-o’s out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off.

    Mounting: Centric Rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the of the shroud to reduce inside diameter, making them more of a “press fit” onto the lens holder of the projector. JB Quik Weld is also recommended in order to prevent the shrouds from vibrating loose over time.

    LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The all new XB LED systems are easy to mount on the front of your shrouds, are reliable, and of course, awesome looking. Our convenient Size Guide makes picking out the right diameter easy! These shrouds feature DRL-Vents that will glow with light if you wanted to do something a bit different and mount the halos inside.

    Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it’s normal. Luckily, they’re made of plastic – making that easily possible. We recommend Dremel EZ Lock cutting wheels to make the job easy.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    From: $50.00
  • Morimoto G37 Shroud
    Morimoto G37 Shroud

    G37-R

    DESCRIPTION

    This radically designed shroud offers all the coverage you need, but still allows light to escape through the four staggered layers of chrome bands that surround it’s body.More

    Design: The G37-R shrouds are inspired by the OEM Infiniti G headlight shroud, taking that design and making it more ideal for retrofitting.

    In Comparison: Don’t make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: our shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheap-o’s out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off.

    Mounting: Centric Rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the of the shroud to reduce inside diameter, making them more of a “press fit” onto the lens holder of the projector. JB Quik Weld is also recommended in order to prevent the shrouds from vibrating loose over time.

    LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The all new XB LED systems are easy to mount on the front of your shrouds, are reliable, and of course, awesome looking. Our convenient Size Guide makes picking out the right diameter easy! These shrouds feature DRL-Vents that will glow with light if you wanted to do something a bit different and mount the halos inside.

    Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it’s normal. Luckily, they’re made of plastic – making that easily possible. We recommend Dremel EZ Lock cutting wheels to make the job easy.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    From: $50.00
  • GTi-R Shrouds 1
    GTi-R Shrouds 1

    GTI-R

    DESCRIPTION

    A smaller fully circular shape coupled with a series of dimples evenly arrayed around the face define the look of this clean design. Inspired by the VW GTI.More

    Design: Though small in size, these bezels still manage to completely cover many projectors from view, making them popular for smaller headlights or quad retrofits.

    In Comparison: Don’t make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: our shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheap-o’s out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off.

    Mounting: Centric Rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the of the shroud to reduce inside diameter, making them more of a “press fit” onto the lens holder of the projector. JB Quik Weld is also recommended in order to prevent the shrouds from vibrating loose over time.

    LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The all new XB LED systems are easy to mount on the front of your shrouds, are reliable, and of course, awesome looking. Our convenient Size Guide makes picking out the right diameter easy! These shrouds feature DRL-Vents that will glow with light if you wanted to do something a bit different and mount the halos inside.

    Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it’s normal. Luckily, they’re made of plastic – making that easily possible. We recommend Dremel EZ Lock cutting wheels to make the job easy.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    From: $50.00
  • Iris Shrouds 1
    Iris Shrouds 1

    IRIS

    DESCRIPTION

    Inspired by the Volkswagen Tiguan, they feature a textured black lip that surrounds the projector lens, surrounded by a perfectly smooth vacuum metalized chrome finish.More

    In Comparison: Don’t make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: our shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheap-o’s out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off.

    Mounting: Centric Rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the of the shroud to reduce inside diameter, making them more of a “press fit” onto the lens holder of the projector. JB Quik Weld is also recommended in order to prevent the shrouds from vibrating loose over time.

    LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The all new XB LED systems are easy to mount on the front of your shrouds, are reliable, and of course, awesome looking. Our convenient Size Guide makes picking out the right diameter easy! These shrouds feature DRL-Vents that will glow with light if you wanted to do something a bit different and mount the halos inside.

    Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it’s normal. Luckily, they’re made of plastic – making that easily possible. We recommend Dremel EZ Lock cutting wheels to make the job easy.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    From: $50.00
  • Morimoto Panamera Shroud
    Morimoto Panamera Shroud

    PANAMERA

    DESCRIPTION

    Inspired by the Porsche Panamera, designed to cover the biggest projectors. This shround can fit everything from a smaller MiniH1 6.0 to FX-R 3.0 Bi-xenon. More

    In Comparison: Don’t make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: our shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheap-o’s out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off.

    Mounting: Centric Rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the of the shroud to reduce inside diameter, making them more of a “press fit” onto the lens holder of the projector. JB Quik Weld is also recommended in order to prevent the shrouds from vibrating loose over time.

    LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The all new XB LED systems are easy to mount on the front of your shrouds, are reliable, and of course, awesome looking. Our convenient Size Guide makes picking out the right diameter easy! These shrouds feature DRL-Vents that will glow with light if you wanted to do something a bit different and mount the halos inside.

    Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it’s normal. Luckily, they’re made of plastic – making that easily possible. We recommend Dremel EZ Lock cutting wheels to make the job easy.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    From: $50.00
  • Mini Gatling Shrouds 1
    Mini Gatling Shrouds 1

    MINI GATLING GUN

    DESCRIPTION

    The Mini Gatling Gun is a smaller version of the popular Gatling Gun design, made for use exclusively with the Morimoto Mini H1 bi-xenon projectors (automatically included with Mini H1). More

    In Comparison: Don’t make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: our shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheap-o’s out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off.

    Mounting: could not be any easier with the Mini Gatling Gun shrouds. Four internal posts line up to the bolt pattern on the mid-section of any generation Morimoto Mini H1 projector, so they’ll bolt right up!

    LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The all new XB LED systems are easy to mount on the front of your shrouds, are reliable, and of course, awesome looking. Our convenient Size Guide makes picking out the right diameter easy! These shrouds feature DRL-Vents that will glow with light if you wanted to do something a bit different and mount the halos inside.

    Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it’s normal. Luckily, they’re made of plastic – making that easily possible. We recommend Dremel EZ Lock cutting wheels to make the job easy.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    From: $35.00
  • Mini Graphite Shrouds 1
    Mini Graphite Shrouds 1

    MINI GRAPHITE

    DESCRIPTION

    One of the available “standard” options for the Morimoto Mini H1 bi-xenon projectors, these unique looking shrouds are composed of translucent gray plastic that glows when the lights are on.More

    In Comparison: Don’t make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: our shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheap-o’s out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off.

    Mounting:  Centric Rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the of the shroud to reduce inside diameter, making them more of a “press fit” onto the lens holder of the projector. JB Quik Weld is also recommended in order to prevent the shrouds from vibrating loose over time.

    LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The all new XB LED systems are easy to mount on the front of your shrouds, are reliable, and of course, awesome looking. Our convenient Size Guide makes picking out the right diameter easy! These shrouds feature DRL-Vents that will glow with light if you wanted to do something a bit different and mount the halos inside.

    Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it’s normal. Luckily, they’re made of plastic – making that easily possible. We recommend Dremel EZ Lock cutting wheels to make the job easy.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    From: $35.00
  • MotoControl H4 Bi-xenon Relay Harness 1
    MotoControl H4 Bi-xenon Relay Harness 1

    MOTOCONTROL BIXENON: H4/9003

    DESCRIPTION

    The H4/9003 MotoControl Bi-xenon wire harness from Morimoto is the industry’s best High & Low Beam capable headlight harness. All-weather resilience. Plug-n-play setup.More

    Under Control: Morimoto makes it easy with the MotoControl H4/9003 Bi-xenon relay harness. Designed to be completely plug-n-play; it’s a seamless solution to keep your low and high beams under control with the original stalk inside the car. Works perfectly with Bi-xenon projector retrofits and Hi/Lo HID systems.

    Advanced: The third generation MotoControl 8-Pin Relay has a tiny built-in capacitor that stores and releases it’s charge between mode changes. So even if there’s a short gap between the low and high beam signals from your car, your HID’s will run smoothly. It’s sealed weather-pack connector is new for 2014 and is a major reliability upgrade compared to other bi-xenon harnesses.
    Universal: This harness is designed to work with both positive and ground switched headlight circuits, making it universally compatible with all vehicles no matter new or old.

    Plug n Play: The layout of the harness makes it easy to install. With just a few simple connections; even your mom could set this thing up! Wire lengths are long enough to be used in everything from compact cars to SUV’s, everything is clearly labeled, and it’s designed to be 100% plug and play (no cutting or splicing needed).

    OEM Grade: Aside from being ahead of the game from a technical standpoint, the relay is also a work of art. With it’s wiring protected by abrasion resistant Techflex mesh sleeving and it’s extruded aluminum relay shell that’s been anodized and laser engraved – the MotoControl Harness will look factory fresh under the hood!

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $60.00
  • Morimoto HD Relay Harness 2
    Morimoto HD Relay Harness 2

    HD RELAY: H1/H3

    DESCRIPTION

    Do I really need a harness? Yes! A relay harness is designed to deliver steady voltage to your HID ballasts directly from the car battery. Nobody likes a flickering headlight, so why risk it? More

    Don’t Skimp: As one of the most important parts in any HID lighting upgrade; don’t skimp out when it comes to your wiring. It doesn’t matter how good your ballasts are. how good your bulbs are. If your harness is a piece of crap: when it gives out your headlights are gonezo. The Morimoto HD Relay harness is easily worth the premium price compared to cheaper alternatives.

    Plug n Play: The layout of the harness makes it easy to install. With just a few simple connections; even your mom could set this thing up! Wire lengths are long enough to be used in everything from compact cars to SUV’s and it’s designed to be 100% plug and play (no cutting or splicing needed).

    Compatible: The HD relay can be used for low beams, high beams, or fog lights on most vehicles. The harness uses industry-standard outputs for compatibility with 99% of ballasts out there, and all of the ones we offer here at Vikom. Note, if your vehicle has a can-bus system or a finicky pulsed headlight circuit – check out our Standalone Canbus or the Mopar Spec harnesses.

    Fail-Safe: Unlike most generic harnesses out there that rely on a single low-quality relay to power both headlights, the Morimoto Harness utilizes one relay per side- so if one did happen fail, you wouldn’t be left completely in the dark. Each 40A relay is completely sealed against the elements using ribbed silicone upper and lower seals, and has an flywheel diode for back-EMF protection. Every other connection harness-wide is sealed with the proper silicone grommets. Live somewhere with weather that regularly sucks? No problem.

    OEM Grade: Aside from being ahead of the game from a technical standpoint, the HD relay is also a work of art. With it’s wiring protected by abrasion resistant Techflex mesh sleeving and OEM-style relay cubes held together by a laser engraved mounting bracket that’s been artfully anodized with a titanium gray finish – the HD relay will look factory fresh under the hood!

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    $50.00
  • Morimoto HD Relay Harness 2
    Morimoto HD Relay Harness 2

    HD RELAY: H7

    DESCRIPTION

    Do I really need a harness? Yes! A relay harness is designed to deliver steady voltage to your HID ballasts directly from the car battery. Nobody likes a flickering headlight, so why risk it? More

    Don’t Skimp: As one of the most important parts in any HID lighting upgrade; don’t skimp out when it comes to your wiring. It doesn’t matter how good your ballasts are. how good your bulbs are. If your harness is a piece of crap: when it gives out your headlights are gonezo. The Morimoto HD Relay harness is easily worth the premium price compared to cheaper alternatives.

    Plug n Play: The layout of the harness makes it easy to install. With just a few simple connections; even your mom could set this thing up! Wire lengths are long enough to be used in everything from compact cars to SUV’s and it’s designed to be 100% plug and play (no cutting or splicing needed).

    Compatible: The HD relay can be used for low beams, high beams, or fog lights on most vehicles. The harness uses industry-standard outputs for compatibility with 99% of ballasts out there, and all of the ones we offer here at Vikom. Note, if your vehicle has a can-bus system or a finicky pulsed headlight circuit – check out our Standalone Canbus or the Mopar Spec harnesses.

    Fail-Safe: Unlike most generic harnesses out there that rely on a single low-quality relay to power both headlights, the Morimoto Harness utilizes one relay per side- so if one did happen fail, you wouldn’t be left completely in the dark. Each 40A relay is completely sealed against the elements using ribbed silicone upper and lower seals, and has an flywheel diode for back-EMF protection. Every other connection harness-wide is sealed with the proper silicone grommets. Live somewhere with weather that regularly sucks? No problem.

    OEM Grade: Aside from being ahead of the game from a technical standpoint, the HD relay is also a work of art. With it’s wiring protected by abrasion resistant Techflex mesh sleeving and OEM-style relay cubes held together by a laser engraved mounting bracket that’s been artfully anodized with a titanium gray finish – the HD relay will look factory fresh under the hood!

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    $50.00
  • Morimoto HD Relay Harness 2
    Morimoto HD Relay Harness 2

    HD RELAY: H8/H9/H11/H16

    DESCRIPTION

    Do I really need a harness? Yes! A relay harness is designed to deliver steady voltage to your HID ballasts directly from the car battery. Nobody likes a flickering headlight, so why risk it? More

    Don’t Skimp: As one of the most important parts in any HID lighting upgrade; don’t skimp out when it comes to your wiring. It doesn’t matter how good your ballasts are. how good your bulbs are. If your harness is a piece of crap: when it gives out your headlights are gonezo. The Morimoto HD Relay harness is easily worth the premium price compared to cheaper alternatives.

    Plug n Play: The layout of the harness makes it easy to install. With just a few simple connections; even your mom could set this thing up! Wire lengths are long enough to be used in everything from compact cars to SUV’s and it’s designed to be 100% plug and play (no cutting or splicing needed).

    Compatible: The HD relay can be used for low beams, high beams, or fog lights on most vehicles. The harness uses industry-standard outputs for compatibility with 99% of ballasts out there, and all of the ones we offer here at Vikom. Note, if your vehicle has a can-bus system or a finicky pulsed headlight circuit – check out our Standalone Canbus or the Mopar Spec harnesses.

    Fail-Safe: Unlike most generic harnesses out there that rely on a single low-quality relay to power both headlights, the Morimoto Harness utilizes one relay per side- so if one did happen fail, you wouldn’t be left completely in the dark. Each 40A relay is completely sealed against the elements using ribbed silicone upper and lower seals, and has an flywheel diode for back-EMF protection. Every other connection harness-wide is sealed with the proper silicone grommets. Live somewhere with weather that regularly sucks? No problem.

    OEM Grade: Aside from being ahead of the game from a technical standpoint, the HD relay is also a work of art. With it’s wiring protected by abrasion resistant Techflex mesh sleeving and OEM-style relay cubes held together by a laser engraved mounting bracket that’s been artfully anodized with a titanium gray finish – the HD relay will look factory fresh under the hood!

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $50.00
  • Morimoto HD Relay Harness 2
    Morimoto HD Relay Harness 2

    HD RELAY: H10

    DESCRIPTION

    Do I really need a harness? Yes! A relay harness is designed to deliver steady voltage to your HID ballasts directly from the car battery. Nobody likes a flickering headlight, so why risk it? More

    Don’t Skimp: As one of the most important parts in any HID lighting upgrade; don’t skimp out when it comes to your wiring. It doesn’t matter how good your ballasts are. how good your bulbs are. If your harness is a piece of crap: when it gives out your headlights are gonezo. The Morimoto HD Relay harness is easily worth the premium price compared to cheaper alternatives.

    Plug n Play: The layout of the harness makes it easy to install. With just a few simple connections; even your mom could set this thing up! Wire lengths are long enough to be used in everything from compact cars to SUV’s and it’s designed to be 100% plug and play (no cutting or splicing needed).

    Compatible: The HD relay can be used for low beams, high beams, or fog lights on most vehicles. The harness uses industry-standard outputs for compatibility with 99% of ballasts out there, and all of the ones we offer here at Vikom. Note, if your vehicle has a can-bus system or a finicky pulsed headlight circuit – check out our Standalone Canbus or the Mopar Spec harnesses.

    Fail-Safe: Unlike most generic harnesses out there that rely on a single low-quality relay to power both headlights, the Morimoto Harness utilizes one relay per side- so if one did happen fail, you wouldn’t be left completely in the dark. Each 40A relay is completely sealed against the elements using ribbed silicone upper and lower seals, and has an flywheel diode for back-EMF protection. Every other connection harness-wide is sealed with the proper silicone grommets. Live somewhere with weather that regularly sucks? No problem.

    OEM Grade: Aside from being ahead of the game from a technical standpoint, the HD relay is also a work of art. With it’s wiring protected by abrasion resistant Techflex mesh sleeving and OEM-style relay cubes held together by a laser engraved mounting bracket that’s been artfully anodized with a titanium gray finish – the HD relay will look factory fresh under the hood!

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $50.00
  • Morimoto HD Relay Harness 2
    Morimoto HD Relay Harness 2

    HD RELAY: 9005

    DESCRIPTION

    Do I really need a harness? Yes! A relay harness is designed to deliver steady voltage to your HID ballasts directly from the car battery. Nobody likes a flickering headlight, so why risk it? More

    Don’t Skimp: As one of the most important parts in any HID lighting upgrade; don’t skimp out when it comes to your wiring. It doesn’t matter how good your ballasts are. how good your bulbs are. If your harness is a piece of crap: when it gives out your headlights are gonezo. The Morimoto HD Relay harness is easily worth the premium price compared to cheaper alternatives.

    Plug n Play: The layout of the harness makes it easy to install. With just a few simple connections; even your mom could set this thing up! Wire lengths are long enough to be used in everything from compact cars to SUV’s and it’s designed to be 100% plug and play (no cutting or splicing needed).

    Compatible: The HD relay can be used for low beams, high beams, or fog lights on most vehicles. The harness uses industry-standard outputs for compatibility with 99% of ballasts out there, and all of the ones we offer here at Vikom. Note, if your vehicle has a can-bus system or a finicky pulsed headlight circuit – check out our Standalone Canbus or the Mopar Spec harnesses.

    Fail-Safe: Unlike most generic harnesses out there that rely on a single low-quality relay to power both headlights, the Morimoto Harness utilizes one relay per side- so if one did happen fail, you wouldn’t be left completely in the dark. Each 40A relay is completely sealed against the elements using ribbed silicone upper and lower seals, and has an flywheel diode for back-EMF protection. Every other connection harness-wide is sealed with the proper silicone grommets. Live somewhere with weather that regularly sucks? No problem.

    OEM Grade: Aside from being ahead of the game from a technical standpoint, the HD relay is also a work of art. With it’s wiring protected by abrasion resistant Techflex mesh sleeving and OEM-style relay cubes held together by a laser engraved mounting bracket that’s been artfully anodized with a titanium gray finish – the HD relay will look factory fresh under the hood!

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $50.00
  • Morimoto HD Relay Harness 2
    Morimoto HD Relay Harness 2

    HD RELAY: 9006

    DESCRIPTION

    Do I really need a harness? Yes! A relay harness is designed to deliver steady voltage to your HID ballasts directly from the car battery. Nobody likes a flickering headlight, so why risk it? More

    Don’t Skimp: As one of the most important parts in any HID lighting upgrade; don’t skimp out when it comes to your wiring. It doesn’t matter how good your ballasts are. how good your bulbs are. If your harness is a piece of crap: when it gives out your headlights are gonezo. The Morimoto HD Relay harness is easily worth the premium price compared to cheaper alternatives.

    Plug n Play: The layout of the harness makes it easy to install. With just a few simple connections; even your mom could set this thing up! Wire lengths are long enough to be used in everything from compact cars to SUV’s and it’s designed to be 100% plug and play (no cutting or splicing needed).

    Compatible: The HD relay can be used for low beams, high beams, or fog lights on most vehicles. The harness uses industry-standard outputs for compatibility with 99% of ballasts out there, and all of the ones we offer here at Vikom. Note, if your vehicle has a can-bus system or a finicky pulsed headlight circuit – check out our Standalone Canbus or the Mopar Spec harnesses.

    Fail-Safe: Unlike most generic harnesses out there that rely on a single low-quality relay to power both headlights, the Morimoto Harness utilizes one relay per side- so if one did happen fail, you wouldn’t be left completely in the dark. Each 40A relay is completely sealed against the elements using ribbed silicone upper and lower seals, and has an flywheel diode for back-EMF protection. Every other connection harness-wide is sealed with the proper silicone grommets. Live somewhere with weather that regularly sucks? No problem.

    OEM Grade: Aside from being ahead of the game from a technical standpoint, the HD relay is also a work of art. With it’s wiring protected by abrasion resistant Techflex mesh sleeving and OEM-style relay cubes held together by a laser engraved mounting bracket that’s been artfully anodized with a titanium gray finish – the HD relay will look factory fresh under the hood!

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $50.00
  • Morimoto HD Relay Harness 2
    Morimoto HD Relay Harness 2

    HD RELAY: 9012

    DESCRIPTION

    Do I really need a harness? Yes! A relay harness is designed to deliver steady voltage to your HID ballasts directly from the car battery. Nobody likes a flickering headlight, so why risk it? More

    Don’t Skimp: As one of the most important parts in any HID lighting upgrade; don’t skimp out when it comes to your wiring. It doesn’t matter how good your ballasts are. how good your bulbs are. If your harness is a piece of crap: when it gives out your headlights are gonezo. The Morimoto HD Relay harness is easily worth the premium price compared to cheaper alternatives.

    Plug n Play: The layout of the harness makes it easy to install. With just a few simple connections; even your mom could set this thing up! Wire lengths are long enough to be used in everything from compact cars to SUV’s and it’s designed to be 100% plug and play (no cutting or splicing needed).

    Compatible: The HD relay can be used for low beams, high beams, or fog lights on most vehicles. The harness uses industry-standard outputs for compatibility with 99% of ballasts out there, and all of the ones we offer here at Vikom. Note, if your vehicle has a can-bus system or a finicky pulsed headlight circuit – check out our Standalone Canbus or the Mopar Spec harnesses.

    Fail-Safe: Unlike most generic harnesses out there that rely on a single low-quality relay to power both headlights, the Morimoto Harness utilizes one relay per side- so if one did happen fail, you wouldn’t be left completely in the dark. Each 40A relay is completely sealed against the elements using ribbed silicone upper and lower seals, and has an flywheel diode for back-EMF protection. Every other connection harness-wide is sealed with the proper silicone grommets. Live somewhere with weather that regularly sucks? No problem.

    OEM Grade: Aside from being ahead of the game from a technical standpoint, the HD relay is also a work of art. With it’s wiring protected by abrasion resistant Techflex mesh sleeving and OEM-style relay cubes held together by a laser engraved mounting bracket that’s been artfully anodized with a titanium gray finish – the HD relay will look factory fresh under the hood!

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $50.00
  • Morimoto HD Relay Harness 2
    Morimoto HD Relay Harness 2

    HD RELAY: 880/881

    DESCRIPTION

    Do I really need a harness? Yes! A relay harness is designed to deliver steady voltage to your HID ballasts directly from the car battery. Nobody likes a flickering headlight, so why risk it? More

    Don’t Skimp: As one of the most important parts in any HID lighting upgrade; don’t skimp out when it comes to your wiring. It doesn’t matter how good your ballasts are. how good your bulbs are. If your harness is a piece of crap: when it gives out your headlights are gonezo. The Morimoto HD Relay harness is easily worth the premium price compared to cheaper alternatives.

    Plug n Play: The layout of the harness makes it easy to install. With just a few simple connections; even your mom could set this thing up! Wire lengths are long enough to be used in everything from compact cars to SUV’s and it’s designed to be 100% plug and play (no cutting or splicing needed).

    Compatible: The HD relay can be used for low beams, high beams, or fog lights on most vehicles. The harness uses industry-standard outputs for compatibility with 99% of ballasts out there, and all of the ones we offer here at Vikom. Note, if your vehicle has a can-bus system or a finicky pulsed headlight circuit – check out our Standalone Canbus or the Mopar Spec harnesses.

    Fail-Safe: Unlike most generic harnesses out there that rely on a single low-quality relay to power both headlights, the Morimoto Harness utilizes one relay per side- so if one did happen fail, you wouldn’t be left completely in the dark. Each 40A relay is completely sealed against the elements using ribbed silicone upper and lower seals, and has an flywheel diode for back-EMF protection. Every other connection harness-wide is sealed with the proper silicone grommets. Live somewhere with weather that regularly sucks? No problem.

    OEM Grade: Aside from being ahead of the game from a technical standpoint, the HD relay is also a work of art. With it’s wiring protected by abrasion resistant Techflex mesh sleeving and OEM-style relay cubes held together by a laser engraved mounting bracket that’s been artfully anodized with a titanium gray finish – the HD relay will look factory fresh under the hood!

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $50.00
  • Morimoto HD Relay Harness 2
    Morimoto HD Relay Harness 2

    HD RELAY: 5202/2504

    DESCRIPTION

    Do I really need a harness? Yes! A relay harness is designed to deliver steady voltage to your HID ballasts directly from the car battery. Nobody likes a flickering headlight, so why risk it? More

    Don’t Skimp: As one of the most important parts in any HID lighting upgrade; don’t skimp out when it comes to your wiring. It doesn’t matter how good your ballasts are. how good your bulbs are. If your harness is a piece of crap: when it gives out your headlights are gonezo. The Morimoto HD Relay harness is easily worth the premium price compared to cheaper alternatives.

    Plug n Play: The layout of the harness makes it easy to install. With just a few simple connections; even your mom could set this thing up! Wire lengths are long enough to be used in everything from compact cars to SUV’s and it’s designed to be 100% plug and play (no cutting or splicing needed).

    Compatible: The HD relay can be used for low beams, high beams, or fog lights on most vehicles. The harness uses industry-standard outputs for compatibility with 99% of ballasts out there, and all of the ones we offer here at Vikom. Note, if your vehicle has a can-bus system or a finicky pulsed headlight circuit – check out our Standalone Canbus or the Mopar Spec harnesses.

    Fail-Safe: Unlike most generic harnesses out there that rely on a single low-quality relay to power both headlights, the Morimoto Harness utilizes one relay per side- so if one did happen fail, you wouldn’t be left completely in the dark. Each 40A relay is completely sealed against the elements using ribbed silicone upper and lower seals, and has an flywheel diode for back-EMF protection. Every other connection harness-wide is sealed with the proper silicone grommets. Live somewhere with weather that regularly sucks? No problem.

    OEM Grade: Aside from being ahead of the game from a technical standpoint, the HD relay is also a work of art. With it’s wiring protected by abrasion resistant Techflex mesh sleeving and OEM-style relay cubes held together by a laser engraved mounting bracket that’s been artfully anodized with a titanium gray finish – the HD relay will look factory fresh under the hood!

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $50.00
  • VIKOM CANBUS-5
    VIKOM CANBUS-5

    STANDALONE CAN-BUS

    DESCRIPTION

    Each harness has a built-in resistor pack to mimic the characteristics of a standard halogen bulb being plugged in to your stock harness, tricking the car into thinking nothing has changed.More

    The Canbus also accommodates 6800uF capacitors to help jump-start the ballasts and keep them running smoothly – using the power directly from the vehicles factory headlight circuit.

    Developed specifically with the VW and Euro market in mind, these are known to work well on cars like the newer VW MK5 Golfs, Jettas, BMW E46, etc.

    With just the fewest connections to make compared to our other harnesses; even your mom could set this thing up on a car it's that easy.

    Sold as a pair, which is considered a substitution for a normal relay harness. (not typically in-addition to)

    Note that these will NOT work with vehicles that have DRL's (Daytime Running Lamps) unless you turn the lights on to low-beam.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $50.00
  • Morimoto Mopar Bi-xenon Harness 2
    Morimoto Mopar Bi-xenon Harness 2

    MOPAR SPEC: H4/9003 BI-XENON HARNESS

    DESCRIPTION

    When a normal harness just won’t with Chryler Vehicles, we always recommend the Mopar Spec MotoControl Bi-xenon relay harness from Morimoto.More

    Chrysler Canbus: Modern Chrysler products like the Dodge Ram trucks all have super picky “can-bus” systems that monitor for changes in the headlight circuit and cause all kinds of problems when doing an HID conversion.

    What’s in a Name: Though its name suggests it will only work on a Chrysler vehicle, this harness is becoming more and more commonly needed on a lot of modern vehicles. Don’t have a “lamp out” warning, but suffering from annoying pulsing current coming from your factory headlight circuit and causing your lights to flicker? this is your answer.

    Can’t Resist: The H4 Bi-xenon Mopar Spec harness utilizes two 50W load resistors with unique blue anodized heat-sinks to safely add that “missing” resistance back into the headlight circuit. There is also a 4700mF capacitor to help absorb any pulsing signals emitted from the stock output for uninterrupted relay function.

    Under Control: Morimoto makes it easy with the MotoContro H4 Bi-xenon relay harness. Designed to be completely plug-n-play; it’s a seamless solution to keep your low and high beams under control with the original stalk inside the car. Works perfectly with Bi-xenon projector retrofits and Hi/Lo HID systems.

    Advanced: The third generation MotoControl 8-Pin Relay has a tiny built-in capacitor that stores and releases it’s charge between mode changes. So even if there’s a short gap between the low and high beam signals from your car, your HID’s will run smoothly. It’s sealed weather-pack connector is new for 2014 and is a major reliability upgrade compared to other bi-xenon harnesses.

    Universal: This harness is designed to work with both positive and ground switched headlight circuits, making it universally compatible with all vehicles no matter new or old.

    Plug n Play: The layout of the harness makes it easy to install. With just a few simple connections; even your mom could set this thing up! Wire lengths are long enough to be used in everything from compact cars to SUV’s, everything is clearly labeled, and it’s designed to be 100% plug and play (no cutting or splicing needed).

    OEM Grade: Aside from being ahead of the game from a technical standpoint, the HD relay is also a work of art. With it’s wiring protected by abrasion resistant Techflex mesh sleeving and it’s extruded aluminum relay shell that’s been anodized and laser engraved – the MotoControl Harness will look factory fresh under the hood!

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $120.00
  • Morimoto Mopar Bi-xenon Harness 2
    Morimoto Mopar Bi-xenon Harness 2

    MOPAR SPEC: 9007/9004 BI-XENON HARNESS

    DESCRIPTION

    When a normal harness just won’t with Chryler Vehicles, we always recommend the Mopar Spec MotoControl Bi-xenon relay harness from Morimoto.More

    Chrysler Canbus: Modern Chrysler products like the Dodge Ram trucks all have super picky “can-bus” systems that monitor for changes in the headlight circuit and cause all kinds of problems when doing an HID conversion.

    What’s in a Name: Though its name suggests it will only work on a Chrysler vehicle, this harness is becoming more and more commonly needed on a lot of modern vehicles. Don’t have a “lamp out” warning, but suffering from annoying pulsing current coming from your factory headlight circuit and causing your lights to flicker? this is your answer.

    Can’t Resist: The 9007 Bi-xenon Mopar Spec harness utilizes two 50W load resistors with unique blue anodized heat-sinks to safely add that “missing” resistance back into the headlight circuit. There is also a 4700mF capacitor to help absorb any pulsing signals emitted from the stock output for uninterrupted relay function.

    Under Control: Morimoto makes it easy with the MotoContro 9007 Bi-xenon relay harness. Designed to be completely plug-n-play; it’s a seamless solution to keep your low and high beams under control with the original stalk inside the car. Works perfectly with Bi-xenon projector retrofits and Hi/Lo HID systems.

    Advanced: The third generation MotoControl 8-Pin Relay has a tiny built-in capacitor that stores and releases it’s charge between mode changes. So even if there’s a short gap between the low and high beam signals from your car, your HID’s will run smoothly. It’s sealed weather-pack connector is new for 2014 and is a major reliability upgrade compared to other bi-xenon harnesses.

    Universal: This harness is designed to work with both positive and ground switched headlight circuits, making it universally compatible with all vehicles no matter new or old.

    Plug n Play: The layout of the harness makes it easy to install. With just a few simple connections; even your mom could set this thing up! Wire lengths are long enough to be used in everything from compact cars to SUV’s, everything is clearly labeled, and it’s designed to be 100% plug and play (no cutting or splicing needed).

    OEM Grade: Aside from being ahead of the game from a technical standpoint, the HD relay is also a work of art. With it’s wiring protected by abrasion resistant Techflex mesh sleeving and it’s extruded aluminum relay shell that’s been anodized and laser engraved – the MotoControl Harness will look factory fresh under the hood!

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $120.00
  • Morimoto Mopar Bi-xenon Harness 1
    Morimoto Mopar Bi-xenon Harness 1

    RANGER PX 13+: H4/9003 BI-XENON HARNESS

    DESCRIPTION

    When a normal harness just won’t with Ford Vehicles, we always recommend the Ford Spec MotoControl Bi-xenon relay harness from Morimoto.More

    Ford Canbus: Modern Ford products like the PX Ranger trucks all have super picky “can-bus” systems that monitor for changes in the headlight circuit and cause all kinds of problems when doing an HID conversion.

    What’s in a Name: Though its name suggests it will only work on a Chrysler vehicle, this harness is becoming more and more commonly needed on a lot of modern vehicles. Don’t have a “lamp out” warning, but suffering from annoying pulsing current coming from your factory headlight circuit and causing your lights to flicker? this is your answer.

    Can’t Resist: The H4 Bi-xenon Mopar Spec harness utilizes two 50W load resistors with unique blue anodized heat-sinks to safely add that “missing” resistance back into the headlight circuit. There is also a 4700mF capacitor to help absorb any pulsing signals emitted from the stock output for uninterrupted relay function.

    Under Control: Morimoto makes it easy with the MotoContro H4 Bi-xenon relay harness. Designed to be completely plug-n-play; it’s a seamless solution to keep your low and high beams under control with the original stalk inside the car. Works perfectly with Bi-xenon projector retrofits and Hi/Lo HID systems.

    Advanced: The third generation MotoControl 8-Pin Relay has a tiny built-in capacitor that stores and releases it’s charge between mode changes. So even if there’s a short gap between the low and high beam signals from your car, your HID’s will run smoothly. It’s sealed weather-pack connector is new for 2014 and is a major reliability upgrade compared to other bi-xenon harnesses.

    Universal: This harness is designed to work with both positive and ground switched headlight circuits, making it universally compatible with all vehicles no matter new or old.

    Plug n Play: The layout of the harness makes it easy to install. With just a few simple connections; even your mom could set this thing up! Wire lengths are long enough to be used in everything from compact cars to SUV’s, everything is clearly labeled, and it’s designed to be 100% plug and play (no cutting or splicing needed).

    OEM Grade: Aside from being ahead of the game from a technical standpoint, the HD relay is also a work of art. With it’s wiring protected by abrasion resistant Techflex mesh sleeving and it’s extruded aluminum relay shell that’s been anodized and laser engraved – the MotoControl Harness will look factory fresh under the hood!

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $130.00
  • Morimoto Mopar Spec Canbus Relay Harness 2
    Morimoto Mopar Spec Canbus Relay Harness 2

    MOPAR SPEC: LOW BEAM HARNESS

    DESCRIPTION

    When a normal harness just won’t with Chrysler Vehicles, we always recommend the Mopar Spec MotoControl Bi-xenon relay harness from Morimoto.More

    Chrysler Canbus: Modern Chrysler products like the Dodge Ram trucks all have super picky “can-bus” systems that monitor for changes in the headlight circuit and cause all kinds of problems when doing an HID conversion.

    What’s in a Name: Though its name suggests it will only work on a Chrysler vehicle, this harness is becoming more and more commonly needed on a lot of modern vehicles. Don’t have a “lamp out” warning, but suffering from annoying pulsing current coming from your factory headlight circuit and causing your lights to flicker? this is your answer.

    Capacitor & Resistors: The Mopar Spec harness is built around our standard HD low Beam harnesses, but there is also a 4700mF capacitor link to help absorb any pulsing signals emitted from the stock output for uninterrupted relay function. The HD Resistors add the load back onto the factory harness, tricking the ECU into thinking the stock halogen bulbs are still installed. The result is no errors or flickering.

    Don’t Skimp: As one of the most important parts in any HID lighting upgrade; don’t skimp out when it comes to your wiring. It doesn’t matter how good your ballasts are. how good your bulbs are. If your harness is a piece of crap: when it gives out your headlights are gonezo. The Morimoto HD Relay harness is easily worth the premium price compared to cheaper alternatives.

    Plug n Play: The layout of the harness makes it easy to install. With just a few simple connections; even your mom could set this thing up! Wire lengths are long enough to be used in everything from compact cars to SUV’s and it’s designed to be 100% plug and play (no cutting or splicing needed).

    Fail-Safe: Unlike most generic harnesses out there that rely on a single low-quality relay to power both headlights, the Morimoto Harness utilizes one relay per side- so if one did happen fail, you wouldn’t be left completely in the dark. Each 40A relay is completely sealed against the elements using ribbed silicone upper and lower seals, and has an flywheel diode for back-EMF protection. Every other connection harness-wide is sealed with the proper silicone grommets. Live somewhere with weather that regularly sucks? No problem.

    OEM Grade: Aside from being ahead of the game from a technical standpoint, the HD relay is also a work of art. With it’s wiring protected by abrasion resistant Techflex mesh sleeving and it’s extruded aluminum relay shell that’s been anodized and laser engraved – the MotoControl Harness will look factory fresh under the hood!

    NOTE: This harness only works on the 13-14 Dodge Ram, will not work on the 2015+ (we are still developing a solution for the updated truck)

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $95.00
  • HD Load Resistors 1
    HD Load Resistors 1

    MORIMOTO HD LOAD RESISTORS

    DESCRIPTION

    The Morimoto Heavy Duty Load Resistors may do the same thing as a cheap golden resistor, but they’ll stay cooler, last longer, and look better doing it! More

    You got it!: A top notch retrofit, a set of expensive LED bulbs, etc….why skimp out on the resistors that are sometimes required to keep your car happy while running them?

    Notorious: As a component that’s notorious for getting extremely hot when in use, it’s not only careless to use a cheaply made part, its dangerous.

    Above Average: Using two cement resistors housed inside of an anodized aluminum heat-sink, sealed on both ends and then wired using thick 14 gauge wiring and high quality terminals: from end to end the Morimoto HD load resistors are worlds better than your average “golden resistor”

    Optional: Available in single or double resistor configurations to provide resistance across either a ground or positive, or both simultaneously. Most application only require the single pole version.

    Integrated: mounting points should be used to mount the resistor shell to a metal surface under the hood. Must be mounted out of harms way and should not touch any plastic or other wiring.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    From: $15.00
  • CAPACITOR LINK 1
    CAPACITOR LINK 1

    CAPACITOR LINK

    DESCRIPTION

    Modern vehicles are coming from the factory with headlight circuits utilize pulsed voltage to run things like Daytime Running Lights.More

    Flicker-Proof: Your HID system on vehicles with pulsing headlight circuits. Without a capacitor link: The ballasts will flicker/flash even if you install a relay harness since the pulse will translate into the relays – causing them to open and shut rapidly (often sounds like a buzzing noise)

    Easy Fix: Simple plug-n-play installation between the factory output and the harness input with just one ground to connect. The Capacitor Link will intercept the pulsed voltage, store it, and then release it smoothly into the harness. It basically translates irregular “on/off” signals to constant “on” signals.

    Ingredients: Our Capacitor Link utilizes a 10,000μF electrolytic capacitor, 14 gauge wiring, and OEM-quality 9006 Male/Female Input/outputs for universal compatibility with basically all single-xenon or low beam relay harnesses.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $25.00
  • 9005_-_9005_9006_1
    9005_-_9005_9006_1

    HIGH BEAM SPLITTERS

    DESCRIPTION

    Forget about crimp-on wire taps, these convenient “Y” pigtails make splitting or doubling the signals from your headlight system easy and clean.More

    Double High Beams: So you already have a halogen high beam? When retrofitting a bi-xenon projector; you can harness the stock high beam power to activate the bi-xenon solenoid at the same time, thus doubling your high beam output.

    Quad Retrofits: Use a splitter to run two low beam harnesses in parallel for four ballasts and then activate two pairs of bi-xenon solenoids off a single high beam output. Three total splitters needed.

    Sport Bikes Retrofits: Instead of a single low beam and a single high beam, you can retrofit two bi-xenon projectors and split the single high beam output into both projector solenoids. Instant dual low beam dual high beam setup! (generally H7 Male to 9006/9006 female)

    All Fitments: For the input, make sure to select the size that matches with your stock high beam bulb type. The output will generally be the female version of that same bulb, coupled with a 9006 to plug into your bi-xenon projector solenoid.

    Freebie: When you order a bi-xenon retrofit kit from TRS that’s spec’d with a low beam relay harness, we’ll automatically include the 9005>9005/9006 splitters at no charge. 

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    From: $7.50
  • 9006-9006
    9006-9006

    9006 EXTENSION CORDS

    DESCRIPTION

    Some extra length to the outputs of your harness for your HID Ballasts or high beam solenoids with these 9006 Male > 9006 Female extension cords.More

    Oversized: If you’re retrofitting a big truck or mounting your ballasts in an unconventional space – a universally sized relay harness may not have the length you need. Here is the answer.

    Universal: 9006 Male inputs to 9006 Female outputs with 12 inches (30cm) of 14 gauge wire in between, then protected in a heat-resistant TechFlex mesh for an factory-look.

    Sealed: metal pins with rubber grommets on both ends ensures the longevity by keeping moisture out of the connections.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $10.00
  • H7-9006
    H7-9006

    HEADLIGHT SOCKET ADAPTERS

    DESCRIPTION

    When the industry standard for aftermarket lighting calls for mostly 9006 Female inputs, these adapters will come in handy.More

    Go Direct: If your vehicle’s stock headlight circuit is strong enough to power ballasts without a relay harness, these are the perfect solution for non-9006 headlight systems since almost all HID ballasts require a 9006 female input.

    Standard: These are standard equipment on all HD Relay harnesses which are sized for anything except for a 9006 input.

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    $10.00
  • SOLENOID ADAPTER 2
    SOLENOID ADAPTER 2

    MOLEX / 9006 ADAPTERS

    DESCRIPTION

    In the HID Headlight Retrofit world there are two standards for high beam outputs. “Molex” two pin connectors and 9006.More

    9006 Female & Molex Male: These will allow you to use another vendors bi-xenon harness with our bi-xenon projectors.

    9006 Male & Molex Female: These will allow you to use our bi-xenon harness with another vendors hi/lo bulbs or bi-xenon projectors

    Attention: Please note that Male & Female refer to the metal pins inside the plastic housings, not the connector housings themselves.

    For best results: Vikom spec’s only 9006 Male and Female sockets for our high beam inputs and outputs on our harnesses. Don’t make the mistake of thinking your solenoid is dead just because of a poor connection – try our full kit!

    Contact us: Vikom is trusted by customers in Australia, so we invite you to Contact Us today with your questions, or even a wholesale inquiry: we are here to help!

    5.00 out of 5
    $10.00